CPU Speed

This system setting enables you to see and change the current speed of the Central Processing Unit (CPU).

The default is High Speed at 400MHz. Low Speed is 200MHz.

To change the default, select Low Speed and tap OK. A message appear confirming the changed and now current CPU speed.

Tap OK to save the change.

Memory

The Memory system setting enables you to review and manage both RAM (volatile) and IPSM/Storage Card (non-volatile) memory. Dolphin terminals contain 64MB of on-board, volatile RAM memory. Open the Memory setting whenever you receive system messages about memory.

There are three tabs: Main, Storage Card, and Running Programs.

Main Tab

This tab displays the available, in use, and remaining RAM memory used for running and storing programs as well as storing program data.

Field

Description

Total main memory

Total RAM memory.

Storage

RAM memory being used for storing programs and program data.

Program

RAM memory being used to run programs.

Fields Under Storage and Program

 

Allocated

RAM memory allocated for Storage vs. Program use.

In use

RAM memory being used by Storage vs. Program memory functions.

Free

RAM memory available for Storage and Programs use.

To Increase/Decrease RAM Memory

5 - 8

Rev C

Dolphin® 9500 Series User’s Guide

Page 74
Image 74
Dolphin Peripherals 9500 manual CPU Speed, Main Tab