Dolphin Peripherals 9500 Charging with Dolphin Peripherals, Before Initial Use, Time to Charge

Before Initial Use	The terminals are shipped with both batteries discharged of all power. Charge the main battery pack
	for a minimum of four hours before initial use.
Time to Charge	Four hours for the main battery pack, eight hours for the internal backup battery the first time.

Use only Dolphin 9500 Series peripherals, power cables, and power adapters. Use of peripherals, cables, or power adapters not ! sold/manufactured by Hand Held Products will void the warranty and may damage the terminal.

Charging with Dolphin Peripherals

When the battery is installed in the terminal, you can insert the terminal into any one of the following peripherals to charge the main battery pack:

•Dolphin HomeBase (see page 12-1)

•Dolphin Mobile Base (see page 13-1)

•Dolphin ChargeBase (see page 14-1)

•Dolphin Net Base

•Dolphin Charging/Communication Cable

To fully charge the Li-ion battery before installing it in the terminal, use the

•Dolphin QuadCharger (see page 15-1)

•Auxiliary Battery Well of the Dolphin HomeBase (see page 12-5)

Step 4. Initialize the Mobile Computer

1.Wake the terminal by pressing the POWER or SCAN key. The decode LED lights and the scan LED blinks for approximately three seconds. Do NOT press any keys while the terminal is initializing.

2.The terminal initializes and the splash screen displays for a few seconds. The Build numbers indicate the software version.

Bootloader Kernel Keyboard

3. The system performs a hard reset. When the display activates again, follow the instructions that appear.

2 - 8 Rev C Dolphin® 9500 Series User’s Guide