Dolphin Peripherals 9500 manual Wall Mounting

Wall Mounting

You can purchase a wall mount kit that contains

•a mounting bracket,

•three screws, and

•six washer/nut sets.

1. Insert a screw into the round end of each screw slot on the bottom panel. Slide each screw towards the narrow end of the slot. Then, use a washer/nut set on each screw to secure the screw in the slot.

3.Use the remaining washer/ nut sets to secure the mounting brackets to the bottom panel.

5.Secure the back wedge of the mounting brackets to a stable vertical surface.

2.Attach the bottom panel to the mounting bracket; match the holes to the secured screws.

4.Turn the secured HomeBase right side up.

Back wedge Open slot for cords

The back wedge of the mounting bracket contains an open slot for the power and communications cables. There is an extra space between this slot and the rear panel of the HomeBase to allow easy access to the power and communications ports. For more details on both ports, see Rear Panel on page 12-3.

12 - 12 Rev C Dolphin® 9500 Series User’s Guide