Dolphin Peripherals 9500 manual View Menu, Install Protocol, Exit

Menu Item	Tapping this item…
Start/Stop	Starts or stops 802.1X authentication. After you finish the initial configuration, tap the network
	interface and tap Start. If the port is already active, tap Stop first, then Start to force the program
	to read the new configuration file.
Restart	Same as a Stop followed by Start. Tap this when you receive a notice such as the following:

Configure	Opens the Configuration screen displaying the User tab.
Install Protocol	Selecting this option binds the 802.1X protocol to the WLAN adapter currently installed on the
	device. The WLAN adapter then appears in the port list. For more information about network
	adapters, see Network Cards on page 7-24.

Exit

Terminates the client, which stops the 802.1X protocol.

View Menu

To access the View menu, tap View.

The Standard and Advanced Views control the number of columns displayed in the main menu.

Menu Item	Tapping this item…
Standard View	Displays the Port (adapter name) and State columns. This is the default view.
Advanced View	Displays the Port (adapter name), State, Primary Wireless Network, Wireless Network,
	and MAC Address of AP columns. Scroll right to see all columns.

Event Log

The Event Log is a text file that contains status information from the logging function.

Dolphin® 9500 Series User’s Guide Rev C 7 - 17