Dolphin Peripherals 9500 manual Rev C

(a) When you tap Bluetooth LAN Access, the device automatically tries to connect with your favorite access point.

(b)If your LAN requires a passkey, a screen appears, asking for the passkey. Enter the passkey, then tap OK.

(c)After a successful connection is made, the status screen reports Connected.

(d) Now you are ready to access your LAN for Internet access, files, etc.

SCENARIO #3: Your Bluetooth Devices folder has no access points.

(a) When you tap Bluetooth LAN Access, the device automatically begins to search for new Bluetooth devices.

Note: You can also start the device search by tapping Find in the Bluetooth Devices screen. See Scenario #2.

(b)After the search is complete, select the access point you wish to connect to. Tap Select. If the access point is not listed, tap Refresh to search again.

(c) After you tap Select, a service discovery phase begins.

(d)If the LAN requires a Passkey, a screen appears, asking for the Passkey. Enter the passkey, then tap OK.

(e)After a successful connection is made, the screen reports Connected.

(f)Now you are ready to access your LAN for Internet access, files, etc.

8 - 10 Rev C Dolphin® 9500 Series User’s Guide