Dolphin Peripherals 9500 manual To Add an Active Ssid to the Preferred Profile Table

This section contains several icons that enable you to add and configure APs.

Icon	Name	Description
	New	Always active, tap this button to create a new profile.

The following buttons activate only when an Active SSID in the Preferred Profile list is selected.

		Edit			Opens the configuration screens for a selected SSID in the Preferred
					Profiles list.
		Delete			Deletes the selected SSID from the Preferred Profile list.
		Up			Moves the selected SSID up one place in the Preferred Profile list so that
					the terminal hits it prior to the next SSID.
		Down			Move the selected SSID down one place in the Preferred Profile list so
					that the terminal hits it after the prior SSID.
	Note: Remember that the terminal accesses the SSIDs in this list in the exact order that they
	appear; moving an SSID up or down in the list determines the order of contact.
Active SSIDs
	This table shows all APs or peer stations (creator of IBSS) in the vicinity of the terminal that accept
	broadcast associations.
	Each record displays information in the following six columns (Scroll right to see all the columns.):
	Column		This column displays…
	SSID		The Network Name of the AP or peer station and shows the signal strength icon
				.
	Signal		Strength in percentage for the selected SSID.
	Mode		The mode of operation
				=AP
				=Peer station
	Channel		The channel and applied WEP method, if any.
				=WEP Key-On
				=WEP Key-Off
	SupRate		Supported data rate of the AP or the peer station.
	BSSID		BSSID or MAC Address of the AP or the peer station.
	(MAC Addr)
Add
	Tap this button to add an Active SSID to the Preferred Profiles list. Select and active SSID in the list,
	tap Add, and the profile moves to the Preferred Profiles list.
Apply	Tap Apply to associate your station with a selected SSID. The SSID selected can be in the Preferred
	Profile or Active SSIDs lists. When applied, the Status tab opens displaying the status of the wireless
	connection. If the association fails, a search for another AP in the Preferred Profile list automatically
	takes place, and the radio attempts to associate with the station, in order of preference.
Refresh	Tap Refresh to start a new search for all available APs or peer stations in the vicinity.

To Add an Active SSID to the Preferred Profile Table

An SSID needs to be in the Preferred Profile list to be edited.

1.Select an SSID in the Active SSID list and tap Add. The SSID moves to the Preferred Profile list.

If the SSID has the WEP Key turned on, the Settings window displays and prompts you to enter the WEP Method, Encryption Key, and Key ID.

Dolphin® 9500 Series User’s Guide Rev C 7 - 5