Dolphin Peripherals 9500 manual Configuration Screens, Client Configuration Area, On this tab You…

Configuration Screens

Both Client Configuration and Port Settings areas lead you through a series of setup screens. The following diagram displays the different screens and how they are related:

Client Configuration Area

Each user account needs to define the protocol and the credentials used to authenticate a user. Because Windows Mobile devices are usually small devices with a single NIC and, usually, a single user, the initial configuration is usually the only time the software needs to be set up. The Client will need to be reconfigured if the device is used on multiple networks, or if different users share the computer.

Note: Fields are be grayed out if not relevant to the selected protocol.

Accessing the Client Configuration Area

On the main screen, tap Client > Configure (see Client Menu on page 7-16). The Client Configuration screen opens displaying the User tab.

On this tab, You…

User Settings Tab Configure authentication credentials and profiles.

System Settings Tab Set the level of detail that the Client will provide in the system log and zero-config options.

Server Identity Tab Control how the Client authenticates the server that handles the 802.1X protocol on the network side. This applies only to the TLS, TTLS, and PEAP authentication methods and is used to tell the Client what server credentials to accept from the authentication server to verify the server.

7 - 20 Rev C Dolphin® 9500 Series User’s Guide