Dolphin Peripherals 9500 manual Mobile Base Serial Connector

Models: 9500

1 264
Download 264 pages 50.61 Kb
Page 232
Image 232

Mobile Base Serial Connector

The following diagram displays the pin diagram of the serial connector of the bottom panel of the Mobile Base.

Pi n #

Description

 

1

Interna l Jumpe r to Pi n 6

2TXD

3RXD

4DSR

5GND

6DTR

7CTS

8R TS

95 VO LT OUT

Note: Signals referenced are for a DTE device.

The Mobile Base connector is straight to the printed circuit board (PCB). The ninth pin sends 500mA at 5V power out. This can power a peripheral device, such as a mobile printer, as long as that peripheral device can accept 500mA at 5V.

Configuring the Terminal for ActiveSync Communications

1. On the terminal, tap Start > ActiveSync > Tools > Options. ActiveSync opens displaying the PC tab.

2.In the Use this PC drop-down list, select the name of the host PC.

3.Select Sync with this PC during manual sync to indicate that the terminal syncs with the selected host PC when synchronization is run from the terminal.

13 - 8

Rev C

Dolphin® 9500 Series User’s Guide

Page 232
Image 232
Dolphin Peripherals 9500 manual Mobile Base Serial Connector, Configuring the Terminal for ActiveSync Communications