Dolphin Peripherals 9500 manual Mounting the HomeBase, Desk Mounting

Mounting the HomeBase

Set the Dolphin HomeBase on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the HomeBase.

When choosing a location, bear in mind that:

•the mounting location must allow users easy access to the Auxiliary Battery Well, and

•the serial and USB ports as well as the power jack face straight out of the rear panel, and you will most likely want easy access to them in the future.

Desk Mounting

Dolphin charging/communication cradles have a DIN rail (7.5 X 35 mm) slot on the bottom to allow for secure desk attachment of the unit if desired.

Serial and USB port location (not in view)

Auxiliary Battery Well

DIN Rail (7.5 X 35 mm)

To mount the HomeBase, you slide the DIN rail slot along the bottom panel and secure it. Then, using the appropriate nuts and bolts, secure the DIN rail to the desk or flat surface.

Dolphin® 9500 Series User’s Guide Rev C 12 - 11