Verify That Beam Settings Are Set to Receive

The Beam Settings must be set to receive for the terminal to receive data from other infrared devices. To verify, tap Start > Settings > Connections tab > Beam. The Beam Settings window should appear as follows:

Sending Information

To send or receive, the IrDA ports of both devices - whether it’s two terminals, or a terminal and a host device - must be aligned with each other and within a close range. The maximum data-transfer speed is 115 Kbps.

1.Align the IrDA ports.

2.Open the program where you created the item you want to send and locate the item in the list. You can also beam files, but not folders, from File Explorer.

3.Tap and hold the item. A pop-up menu appears.

Pop-up menu

Selected item

4. Select Beam File. The information begins transmitting to the other device.

Receiving Information

1.Align the IrDA ports.

2.Have the owner of the other device send the information to you.

3.Your terminal automatically begins receiving it.

Troubleshooting

If the Beam Settings are not set to receive or you’ve aligned two IrDA ports and the terminal is still not receiving, tap Start > Programs > Infrared Receive. The terminal searches for the sending device.

6 - 6

Rev C

Dolphin® 9500 Series User’s Guide

Page 98
Image 98
Dolphin Peripherals 9500 manual Verify That Beam Settings Are Set to Receive, Sending Information, Receiving Information