Dolphin Peripherals 9500 manual About Tab, Using the Status Icon, Field Description Defaults

Field	Description
Defaults	Resets all the settings to default values
	• Always Enable for Power Save Mode,
	• Automatic based on WEP setting for Authentication Algorithm, and
	• Auto TX Preamble (for Preamble Mode).
Apply	Applies changes. This button is active only when a change has been made on the tab.

About Tab

The About tab displays Version Number and time of build for Network Driver, Configuration Utility, and NIC Firmware.

Using the Status Icon

You access the 801.11b Settings by tapping the Status icon once on the Today screen . The following menu pops up:

Menu Option Wireless Radio On

Wireless Radio Off

Remove Status Icon

Wireless Network Status

Configuration

Advanced Configuration

Version Information

Selecting This Option…

Turns on the radio. LED is on and the Link Icon displays with signal strength.

Turns off the radio. A pop-up window will ask for your confirmation. If confirmed, the LED will be off and the Status icon will change color from green to red on the top without signal strength displayed. The WLAN card/module will stop functioning.

Removes the Status Icon from the bottom tray. A pop- up window asks you to confirm. Click Yes to confirm, or No to cancel.

If confirmed, the Status icon does not display in the task tray, and you will need to go to Start > Programs

>802.11b Settings in the future.

Opens the Status tab; Status Tab, page 7-3.

Opens the Config tab; Config Tab, page 7-4.

Opens the Advanced tab; Advanced Tab, page 7-8.

Opens the About tab; About Tab, page 7-9.

Dolphin® 9500 Series User’s Guide Rev C 7 - 9