Using the Long Roll Accessory
Installing the Aperture Plate
IMPORTANT: To power on the scanner without error, an aperture plate must be installed, latched, and locked.
1.Choose the aperture plate corresponding to the film format you will be scanning.
lettering on left side
120/220
P192_1544ACA
P192_1544AC
2.Position the aperture plate with the lettering (example: 120/220) visible on the left side.
CAUTION: Installing an aperture plate backwards may result in a damaged light bar.
3.Make sure the gate actuator is unlatched for film loading.
4.Center the aperture plate on the lamphouse cover.
aperture 
plate
P192_1547ACA
P192_1547AC
5. Gently lower the aperture plate and, when you feel resistance, push until it is secured.
May 2002 |
