Connecting and Operating the Scanner
Placing a Negative or Mounted Slide in the Film
Holder
Select the appropriate film holder for the negative or mounted slide you will be scanning.
Preparing a Carded Negative
IMPORTANT: For best focus, use the film holder that is closest to the size of the opening in the aperture card.
1. Lift the film holder’s magnetic sheet.
IMPORTANT: In the next step, the emulsion side must be toward the rear of the scanner.
2.With the emulsion side toward the rear of the scanner, locate the carded negative on the film holder’s two pins.
3.Carefully close the magnetic sheet over the carded negative.
emulsion side
carded negative
magnetic |
|
sheet | pin |
film holder
P192_0021AC
Continue with Placing the Film Holder in the Scanner on page
May 2002 |
