Kodak 6B7198 manual Using the Capture Tab, Calibrating the Scanner

Using the Service and Assembly Module (SAM)

Calibrating the Scanner

IMPORTANT: The CAL (70MM-CAL for HR 500 Plus Film Scanner and 4 x 5 for HR Universal Film Scanner) film holder must be in position in the scanner before you continue. See Placing the Empty Film Holder in the Film Holder Guide on page 2-6.

1.If the values on the Calibrate/Image Processing tab do not match the values shown on the sample on page A-7,change them. The sample is a representation of the default values.

2.Select Shift Image Data Bits Up by Four.

3.Click Calibrate All.

Using the Capture Tab

From the Operations window, click the Capture tab when you need to perform a scan.

A-8 May 2002