Using the Long Roll Accessory

CAUTION: When installing the mounting screws in the next step, use care to avoid

dropping the screws inside the scanner

cross threading the screws

mounting screws

rear mounting

slotted screw screw

P192_1543BCA

P192_1543BC

6.Install, but do not fully tighten, the rear mounting screw.

7.Hold each of the two mounting screws at the angle of the holes (approximately 45 degrees) and install, but do not tighten, the screws.

CAUTION: In the next step, do not overtighten the mounting screws.

8.Using the long screwdriver provided, tighten the 3 mounting screws until you feel resistance.

D-10

May 2002

Page 74
Image 74
Kodak 6B7198 manual Rear mounting