Using the Service and Assembly Module (SAM)
Setting the Scan Area
To set the Scan Area, enter values for:
•# Pixels (valid values range from 1 through 6002); for fastest scanning, enter a value of 1000
•Pixel Offset (valid values range from 0 through 6001)
•# Lines (valid values range from 1 through 7464)
•Line Offset (valid values range from 0 through 7463)
•Pixel Summing (valid values are None, 1:2, and 1:4)
NOTE: If you select Pixel Summing of 1:2 or 1:4, use the Actual #Pixels and Actual #Lines for viewing the image in the Adobe Photoshop program.
Scanning the Image Data
1.If desired, save the scanned image as a file:
a.Enter the Path information (file destination).
b.Select Save image to file.
2.Click Scan.
May 2002 |
