Using the Long Roll Accessory
6.Change the Detection Function Setting to F HS (high speed): a. Press and hold MODE until F St appears.
TEACH | ADJ | MODE |
SET | RUN L | D |
b.Press TEACH once. F Ld appears.
c.Press TEACH again. F HS appears.
d.Move SET/ADJ/RUN to RUN.
Programming the Right Sensor
1.Open the plastic cover on the right display.
2.Make sure the operation mode selector is set to L.
3.Move SET/ADJ/RUN to SET.
4.Change the Detection Function Setting to F HS:
a.Press and hold MODE until F St appears.
b.Press TEACH once. F Ld appears.
c.Press TEACH again. F HS appears.
d.Move SET/ADJ/RUN to RUN.
May 2002 |
