Kodak 6B7198 manual Connecting and Operating the Scanner, Preparing the Host Computer

2 Connecting and Operating the Scanner

This chapter gives instructions for:

•preparing the host computer

•connecting the HR Film Scanner to the host computer

•starting up the scanner system

•preparing to scan an image

•performing a scan

•shutting down the scanner

Preparing the Host Computer

CAUTION: Do not connect power to the scanner.

1.Install the Ultra-Wide SCSI board into the host computer.

IMPORTANT: Check the README file on the CD before you install the software.

2.Install the SAM software. See Installing the Service and Assembly Module (SAM) Software on page A-2.

May 2002 2-1