Using the Long Roll Accessory
Latching and Unlatching the Gate Actuator
Be sure you know how to latch and unlatch the gate actuator before installing the aperture plate. The gate actuator must be in the unlatched position for film loading and in the latched position for scanning.
Latching the Gate Actuator
CAUTION: Be sure the gate actuator is latched before you move the locking arm to the locked position.
1.Pull the gate actuator toward you until the gate “latches” in place.
2.To lock the gate actuator, move the locking arm to the left (locked) position.
Unlatching the Gate Actuator
CAUTION: Always move the locking arm to the unlocked position before unlatching the gate.
To unlatch the gate actuator, manually squeeze the two tabs together and release.
arm in the unlocked position
gate actuator
2 tabs for unlatching
P192_1546GCA
P192_1546GC
May 2002 |
