Kodak 6B7198 manual Mounting screws Connector Guide pins

2mounting screws

connector

2 guide pins

connector

Using the Long Roll Accessory

CAUTION: Use canned or pressurized air to remove any dust or debris from the connector.

P192_1540BCA

P192_1540BC

4.Inspect and remove any dust and debris from the connector.

5.Remove the two mounting screws on each side of the connector.

6.Insert the two guide pins in the holes from which you removed the mounting screws.

7.Tighten the guide pins with a 1/4-in. open-end wrench.

May 2002 D-7