Upgrading the Scanner’s Firmware

Using the Long Roll Accessory

Check the Web site (see page D-2) for the most up-to-date instructions. 1. Open SAM and click the Transfer tab on the Operations window.

2.Make sure the File Type is Firmware (W).

3.Click Browse and find the .zip file that you downloaded from KODAK.COM (example: HR500\Px03_000.zip).

4.Click Open.

5.Make sure the Location on the Scanner is Current.

6.Click To Scanner to start the transfer.

The transfer takes approximately one minute.

D-3

Kodak 6B7198 manual Upgrading the Scanner’s Firmware