PREPARATION 
Remote Control Batteries Installation
This remote control operates on 2 “AA” batteries.
1. Open the battery compartment cover.
Ɣ Slide opens the battery compartment cover on the backside of the remote
control in the direction of an arrow.
2. Installing the batteries.
Ɣ Install 2 “AA” batteries (included) making sure the polarities match the
indication inside the compartment.
3. Close the battery compartment cover.
Ɣ To close the battery compartment cover, slide the cover in the direction
of an arrow till it clicks shut.
CAUTION
It could cause corrosion or battery leakage and may result in physical injury and/or property damage including fire.
ƔNever mix used and new batteries in the device.
ƔReplace all the batteries in a device at the same time.
ƔRemove the batteries if the remote control is not going to be used for an extended period of time.
To avoid possible failure, read the following instructions and handle the remote control properly.
ƔDo not drop or have an impact on the remote control.
ƔDo not spill water or any liquid on the remote control.
ƔDo not place the remote control on the wet object.
ƔDo not place the remote control under the direct sunlight or near sources of excessive heat.
Caution When Moving the Main Unit
As this product is heavy, whenever it is moved, two people are required to transport it safely.
When moving the unit, hold it by the top and bottom frame of the LCD screen. (See the figures below for details.)
12