Connecting a serial ATA hard disk drive | Lenovo 9213, 9212 specification

2.Connect the extra connector on the signal cable to the new drive.

3.Locate the extra four-wire power connector and connect it to the drive.

Connecting a serial ATA hard disk drive

A serial hard disk drive can be connected to any available SATA IDE connector.

1.Locate the signal cable that comes with the new drive.

2.Locate an available SATA IDE connector on the system board. See “Identifying parts on the system board” on page 11.

3.Connect one end of the signal cable to the drive and the other to an available SATA IDE connector on the system board.

4.Locate one of the extra five-wire power connectors and connect it to the drive.

What to do next

vTo work with another option, go to the appropriate section.

vTo complete the installation, go to “Replacing the cover and connecting the cables” on page 24.

Installing security features

To help prevent hardware theft and unauthorized access to your computer, security lock options are available. In addition to physical locks, unauthorized use of your computer can be prevented by a software lock that locks the keyboard until a correct password is typed in.

Chapter 1. Installing options 21

Image 37

Lenovo 9213, 9212 manual Connecting a serial ATA hard disk drive, Installing security features

Contents

User Guide Types 9212 Page User Guide Types 9212 Page Contents Iv User Guide Conditions that require immediate action Important safety information Service General safety guidelines Extension cords and related devices Power cords and power adapters Batteries Plugs and outlets Heat and product ventilation CD and DVD drive safety Lithium battery notice Additional safety informationTo connect To disconnect Laser compliance statement Modem safety information Power supply statement Information resources Overview Xiv User Guide Features Installing options Memory Operating systems, preinstalled varies by model type Available options Tools required Specifications Handling static-sensitive devices Installing external options Locating the connectors on the front of your computer Locating the connectors on the rear of your computer Obtaining device drivers Connector Description Removing the cover Identifying parts on the system board Locating components Installing memory modules What to do next Installing adapters What to do next Drive specifications Installing internal drives User Guide Installing a drive in bay 1 or bay Installing a hard disk drive in bay Installing options Connecting the first optical drive Connecting drives Installing security features Connecting a serial ATA hard disk drive Changing the battery Password protectionPadlock Erasing a lost or forgotten password clearing Cmos Replacing the cover and connecting the cables Using the Setup Utility program Using Security Profile by Device Setting, changing, and deleting a passwordSelecting a startup device Selecting a temporary startup device Exiting from the Setup Utility programChanging the startup sequence User Guide Updating flashing Bios from your operating system Updating flashing Bios from a diskette or CD-ROMAppendix A. Updating system programs System programs Recovering from a POST/BIOS update failure Cleaning an optical mouse Appendix B. Cleaning the mouseCleaning a mouse with a ball User Guide Basic AT commands Appendix C. Manual modem commands Set Pulse dial as default Low speaker volumeSet Tone Dial as default Internal speaker on until carrier detected Extended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commands Voice commands Appendix C. Manual modem commands User Guide Appendix D. Notices Trademarks Television output notice Index Sata connectors Page Part Number 39J7678