Manuals / Lenovo / Computer Equipment / Laptop

Lenovo 9212, 9213 manual Installing a hard disk drive in bay

Models: 9213 9212

1 62

Download 62 pages 50.32 Kb

Page 34

Installing a hard disk drive in bay 3

vIf you are installing an additional optical drive, set it as a slave device.

vIf there is a combination of optical and parallel ATA hard disk drives in bays 1 and 2, set the hard disk drive as a master device and the optical drive as a slave device.

Refer to the documentation that comes with your drive for master/slave jumper information.

6.For a 5.25-inch drive, install a retainer bracket on the side of the drive.

7.For a 3.5-inch drive, install the drive into the Universal Adapter Bracket, 5.25 to 3.5-inch.

8.Install the drive into the bay until it snaps into position.

Note: If you are installing the adapter bracket, install the screws that secure the bracket in the bay.

9.Continue at “Connecting drives” on page 20.

Installing a hard disk drive in bay 3

1.Remove the computer cover. See “Removing the cover” on page 10.

18User Guide

Image 34

Lenovo 9212, 9213 manual Installing a hard disk drive in bay

Contents

User Guide Types 9212 and Page User Guide Types 9212 and Fourth Edition October Copyright Lenovo Contents ivUser Guide Important safety information Conditions that require immediate actionGeneral safety guidelines ServicePower cords and power adapters Extension cords and related devicesBatteries Plugs and outletsviiiUser Guide CD and DVD drive safety Heat and product ventilationLithium battery notice Additional safety informationDo not Modem safety information Laser compliance statementPower supply statement xiiUser GuideInformation resources Overviewxiii xivUser Guide Chapter 1. Installing options FeaturesMemory System management featuresInput/output features Internal drivesPreinstalled software PowerSecurity features ExpansionAvailable options Dimensions SpecificationsTools required WeightInstalling external options Handling static-sensitivedevicesUSB connector IEEE 1394 connectorMicrophone connector Headphone connectorDiagnostic LEDs Connector Obtaining device driversDescription Removing the cover Locating components Identifying parts on the system boardInstalling memory modules Installing adapters What to do next6.Close the adapter latch to secure the adapter Installing internal drives Drive specifications1Bay 1 - Maximum height: 43.0 mm 1.7 in Installing a drive in bay 1 or bay Installing a hard disk drive in bay 2.Remove the front bezel by pushing the blue release button as shown Connecting drives Connecting the first optical driveConnecting a serial ATA hard disk drive Installing security featuresPadlock Password protectionChanging the battery 22User GuideTo change the battery Replacing the cover and connecting the cables Viewing and changing settings Chapter 2. Using the Setup Utility programStarting the Setup Utility program Using passwordsSelecting a startup device Setting, changing, and deleting a passwordUsing Security Profile by Device 3.Select Security Profile by DeviceSelecting a temporary startup device Exiting from the Setup Utility programChanging the startup sequence 28User Guide Appendix A. Updating system programs Updating flashing BIOS from a diskette or CD-ROMUpdating flashing BIOS from your operating system System programsRecovering from a POST/BIOS update failure Cleaning an optical mouse Appendix B. Cleaning the mouseCleaning a mouse with a ball 8.Replace the ball and the retainer ring Appendix C. Manual modem commands Basic AT commandsCommand Extended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 1 commands Fax Class 2 commandsVoice commands Telekom PTT SCR-BE Taximpulssperrfilter-12kHz Attention Switzerland UserPTT Art. Bakom 93.0291.Z.N 40User Guide 500 Park Offices Drive, Hwy. Appendix D. NoticesLenovo United States, Inc Research Triangle Park, NC U.S.ATelevision output notice TrademarksIndex A Page Page Part Number: 39J7678 Printed in USA 1P P/N: 39J7678