Installing options | Lenovo 9213, 9212 manual

2.Remove the front bezel by pushing the blue release button as shown.

3.Remove the metal shield from drive bay 3 by using a flat-blade screwdriver to gently pry it loose.

4.PATA drives must be jumpered as either a master or a slave device. SATA hard disk drives do not require either a master or a slave device jumper. If you are installing an SATA hard disk drive, continue to step 6.

5.If there is a combination of optical and parallel ATA hard disk drives in bays 1, 2, and 3, set the hard disk drive as a master device and the optical drive as a slave device.

Refer to the documentation that comes with your drive for master/slave jumper information.

6.Install a retainer bracket on the side of the drive.

Chapter 1. Installing options 19

Image 35

Lenovo 9213, 9212 manual Installing options

Contents

User Guide Types 9212 Page User Guide Types 9212 Page Contents Iv User Guide Conditions that require immediate action Important safety information Service General safety guidelines Extension cords and related devices Power cords and power adapters Batteries Plugs and outlets Heat and product ventilation CD and DVD drive safety To connect To disconnect Additional safety informationLithium battery notice Laser compliance statement Modem safety information Power supply statement Information resources Overview Xiv User Guide Features Installing options Memory Operating systems, preinstalled varies by model type Available options Tools required Specifications Handling static-sensitive devices Installing external options Locating the connectors on the front of your computer Locating the connectors on the rear of your computer Obtaining device drivers Connector Description Removing the cover Identifying parts on the system board Locating components Installing memory modules What to do next Installing adapters What to do next Drive specifications Installing internal drives User Guide Installing a drive in bay 1 or bay Installing a hard disk drive in bay Installing options Connecting the first optical drive Connecting drives Installing security features Connecting a serial ATA hard disk drive Padlock Password protectionChanging the battery Erasing a lost or forgotten password clearing Cmos Replacing the cover and connecting the cables Using the Setup Utility program Selecting a startup device Setting, changing, and deleting a passwordUsing Security Profile by Device Changing the startup sequence Exiting from the Setup Utility programSelecting a temporary startup device User Guide System programs Updating flashing Bios from a diskette or CD-ROMUpdating flashing Bios from your operating system Appendix A. Updating system programs Recovering from a POST/BIOS update failure Cleaning a mouse with a ball Appendix B. Cleaning the mouseCleaning an optical mouse User Guide Basic AT commands Appendix C. Manual modem commands Internal speaker on until carrier detected Low speaker volumeSet Pulse dial as default Set Tone Dial as default Extended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commands Voice commands Appendix C. Manual modem commands User Guide Appendix D. Notices Trademarks Television output notice Index Sata connectors Page Part Number 39J7678