Hitachi 26LD9000TA2 user manual Troubleshooting

Page 37

TROUBLESHOOTING(continued)

Symptom and Check List (continued)

	Symptoms			Check list	Page

	z No picture		z Check if the Power Cord is plugged into the socket firmly.		14	,	19
	The Indicating lamp	Off	z Check if the Main Power is ON.		14	,	19
	The Indicating lamp	Off	z Check if the Main Power is ON.

			z Check if all the cables of the external equipments are connected
	z No picture		correctly and firmly.
	z No picture		z Check if the power of the external equipments is ON.
	The Indicating lamp	Orange	z Check if the power of the external equipments is ON.
	The Indicating lamp	Orange	z Check if the TV/AV mode has been selected correctly.			35
	It means that the unit is in “Power Save		z Check if the TV/AV mode has been selected correctly.			35
	It means that the unit is in “Power Save		z Check if the PC is in Power Save mode or not.
	mode”.		z Check if the PC is in Power Save mode or not.
	mode”.		z Refer to “Power Save mode” and “When following messages appears

			on the screen”

	z No picture		z Check if the signal cable is connected correctly and firmly.		14	~ 18
	The indicating lamp	Green	z Adjust the level of Brightness and Contrast lower.		14	~ 18
	The indicating lamp	Green	z Adjust the level of Brightness and Contrast lower.

	z The top of the television and surface of		z It may happen when you use the unit for long hours. Turn off the Main		39	,	41
	the panel heat up.		Power of the unit for a while. Please note that this is not malfunction.		39	,	41
	the panel heat up.

	z Image cannot be displayed in the correct		z Press	button to check if the input signal of the displayed image is	25 ,		39 ,
	position.		compatible with the specification of the television.			41

	z When the VCR is in special playback		z It could happen when the VCR is connected to Component output,
	features (Fast forward or Rewind), the
	features (Fast forward or Rewind), the		such as 480i. This is not malfunction.
	screen gets dark and cannot see the		such as 480i. This is not malfunction.
	screen gets dark and cannot see the		z Try Composite output or S-video output and check the picture again.
	image at all.
	image at all.

zThe display size is fixed at “Full” when the receiving signals are

	z Screen display size cannot be switched	1080i/60Hz, 1080i/50Hz, 720p/60Hz, or 720p/50Hz.
			32 , 33
	correctly.	z Check the signal status by pressing the
			button on the remote
		control.

zCheck if the cables are connected correctly.

z Cannot be displayed the image from HDMI.	z Check the output format of the equipments.	40	~	41
	z (Please refer to “Connecting Procedure” and “Recommended Signal	40	~	41

	List”.)

ENGLISH

37

Image 37

Contents 26LD9000TA2 32LD9000TA2 Important Safety Instructions ContentsAbout This Manual InstructionsTrademark Credits About SoftwareAbout the Symbols Safety PrecautionsOther Symbols There is a risk of fire, electric shock, or serious injury„ Do not place any objects on top of the unit Safety Precautions„ Do not place the unit at the dusty place Cleaning and Maintenance PrecautionsCommon phenomena of LCD Panel About LCD PanelFeatures Main Unit Component NamesFront Panel Rear PanelComponent Names Remote ControlOpen the battery compartment cover Remote Control Batteries InstallationInstalling the batteries Close the battery compartment coverPreparation Safety Precaution on Main Unit InstallationAnti-Tumble Measures Connection Connecting ProcedureTerminal Positions Connection Connecting to External Equipment Terminals on RearVCR Information Terminals on SideInformation How to secure the cable Connecting the plug into the wall socketTo turn On the power of the television Power On/OffTo turn Off the power of the television Basic OperationBasic Operation Volume UP/DOWNMute Input Signal Screen Display Input Switching to TV/AV1~4, HDMI, and RGBMenu Operation How to use the On-Screen Display OSD systemLanguage Menu Selected Items Setup hint Setup Menu TV modeAuto Tuning Manual TuningSort Fine TuningTeletext Language Setup Menu RGB mode Picture Menu TV/AV mode 3D Comb Filter Film ModeBlack Enhancement Selected Items Setup hint Contrast Picture Menu RGB modeAudio Menu Off Timer Timer MenuAbout Teletext FunctionAspect ratio represents horizontal vertical ratio on screen Function Size Switching Sound Multiplex TV mode Audio Switching Bilingual/Dual Sound broadcast Stereo broadcastWhen the RGB input is selected Power Save ModeReturning to operating status When Following Messages Appear on the Screen TroubleshootingSymptom and Check List Troubleshooting If the display condition is not improved with Auto Adjust 26LD9000TA2 32LD9000TA2 Product SpecificationsVideo input RF inputSignal Input Product SpecificationsRGB terminal D-sub 15-pin connector Input connector pin specificationsWith Hdmi Input Recommended Signal ListWith RGB input