Hitachi 26LD9000TA2 user manual Precautions, Cleaning and Maintenance

Page 7

SAFETY PRECAUTIONS (continued)

PRECAUTIONS

„Do not install the unit in high temperature.

It could damage the cabinet or parts of the product.

ƔDo not install near any heat sources such as radiator, heat registers, stoves, or other apparatus that produce heat.

ƔKeep the unit out of direct sunlight. It could increase the temperature of the unit and cause malfunction.!

„Viewing Advice

ƔThe lighting of the environment in which the product is used should be appropriate. Too bright / dark environment is not good for your eyes.

ƔTake time to relax your eyes occasionally.

ƔWhen you use this product, keep away from the television 3~7 times of the vertical length of the panel. This is the best viewing distance in order to protect your eyes against eyestrain.

ƔAdjust the volume in appropriate level, especially during the night.!

„When transporting this product:

ƔWhen the product needs to be transported due to moving or repair, use the carton box and buffer material comes with this product.

ƔDo not keep this product lying sideways during transportation. It could damage the panel surface or degrade the phosphors of the panel.

„Keep away from the television when you use radio.

This television is designed to meet the international EMI standards due to prevent the interference against the radio. However, the unit may generate noise in the radio.

ƔIf the noise is in the radio, please try the following actions.

ƔAdjust the direction of the radio antenna in order not to receive the interference radio wave from the unit.

ƔKeep the radio away from the television.

ƔUse coaxial cable for the antenna.

„About the infrared communication devices:

ƔThe infrared communication devices such as cordless microphone or cordless headphone may not be available around the television. It is because of the communication failure. Please note that this is not malfunction.

„When you dispose this product at the end of its life, follow the regulations at your residential area.

ƔFor more information, contact the local authority or the dealer where you purchased the product.

„Please avoid installing the TV directly on the wooden floor. Depending on the quality and condition of floor, the desktop stand may stick to the floor face, and surface could come off when the TV is lifted up.

Cleaning and Maintenance

Please make sure to unplug the power cord before cleaning the television.

„How to clean the LCD panel of the television.

ƔWipe the panel with a lint-free and dry cloth in order to prevent damage to the panel surface.

ƔDo not use a chemical cloth or cleaner. Depending on the ingredients, it may cause discoloration and damage the panel surface.

ƔDo not wipe with a hard cloth or rub hard. It may hurt the panel surface.

ƔIn case of the greasy dirt such as fingerprint, wipe with a lint-free cloth moistened by a diluted neutral detergent solution, and then wipe with a soft and dry cloth.

ƔDo not use a spray cleaner. It could cause malfunction.

„How to clean the cabinet of the television.

ƔThe following may cause crack, deformation, and paint peeling.

ƔDo not wipe the cabinet with benzene, thinner, and other chemical products.

ƔDo not spray volatile solutions such as insecticide over the cabinet.

ƔDo not leave the cabinet in prolonged contact with plastic or rubber materials.

ƔDo not use a chemical cloth, cleaner or wax. Depending on the ingredients, it may cause crack and deformation.

ƔUse a lint-free cloth to clean the cabinet and control panel of the television. In case of the heavy dirt, wipe with a soft cloth moistened by a diluted neutral detergent solution, and then wipe with a soft and dry cloth.

ƔNever use the following detergents. It could cause crack, discoloration, and scratch.

ƔAcid/ alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc.

ENGLISH

7

Image 7
Contents 26LD9000TA2 32LD9000TA2 Important Safety Instructions ContentsAbout Software InstructionsAbout This Manual Trademark CreditsThere is a risk of fire, electric shock, or serious injury Safety PrecautionsAbout the Symbols Other Symbols„ Do not place any objects on top of the unit Safety Precautions„ Do not place the unit at the dusty place Cleaning and Maintenance PrecautionsCommon phenomena of LCD Panel About LCD PanelFeatures Rear Panel Component NamesMain Unit Front PanelComponent Names Remote ControlClose the battery compartment cover Remote Control Batteries InstallationOpen the battery compartment cover Installing the batteriesPreparation Safety Precaution on Main Unit InstallationAnti-Tumble Measures Connection Connecting ProcedureTerminal Positions Connection Connecting to External Equipment Terminals on RearVCR Information Terminals on SideInformation How to secure the cable Connecting the plug into the wall socketBasic Operation Power On/OffTo turn On the power of the television To turn Off the power of the televisionBasic Operation Volume UP/DOWNMute Input Signal Screen Display Input Switching to TV/AV1~4, HDMI, and RGBMenu Operation How to use the On-Screen Display OSD systemLanguage Menu Manual Tuning Setup Menu TV modeSelected Items Setup hint Auto TuningSort Fine TuningTeletext Language Setup Menu RGB mode Picture Menu TV/AV mode 3D Comb Filter Film ModeBlack Enhancement Selected Items Setup hint Contrast Picture Menu RGB modeAudio Menu Off Timer Timer MenuAbout Teletext FunctionAspect ratio represents horizontal vertical ratio on screen Function Size SwitchingStereo broadcast Audio SwitchingSound Multiplex TV mode Bilingual/Dual Sound broadcastWhen the RGB input is selected Power Save ModeReturning to operating status When Following Messages Appear on the Screen TroubleshootingSymptom and Check List Troubleshooting If the display condition is not improved with Auto Adjust RF input Product Specifications26LD9000TA2 32LD9000TA2 Video inputInput connector pin specifications Product SpecificationsSignal Input RGB terminal D-sub 15-pin connectorWith Hdmi Input Recommended Signal ListWith RGB input