MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator’s Manual. More extensive work must be carried out by an authorized service workshop.

Maintenance

Daily

 

Weekly

Monthly

maintenance

maintenance

maintenance

 

 

 

 

 

 

Clean the outside of the machine.

 

X

 

 

 

 

 

 

 

Check that the harness is not damaged.

 

X

 

 

 

 

 

 

 

Make sure the throttle trigger lock and the throttle function correctly from a

 

X

 

 

safety point of view.

 

 

 

 

 

 

 

 

 

 

 

 

Check that the handle and handlebar are undamaged and secured correctly.

 

X

 

 

 

 

 

 

 

Check that the stop switch works correctly.

 

X

 

 

 

 

 

 

 

Check that the cutting attachment does not rotate at idle.

 

X

 

 

 

 

 

 

 

Clean the air filter. Replace if necessary.

 

X

 

 

 

 

 

 

 

Check that the guard is undamaged and not cracked. Replace the guard if it has

 

X

 

 

been exposed to impact or is cracked.

 

 

 

 

 

 

 

 

 

 

 

 

Check that the blade is correctly centred, is sharp, and is not cracked. An off-

 

X

 

 

centre blade will cause vibration that could result in damage to the machine.

 

 

 

 

 

 

 

 

 

 

 

 

Check that the trimmer head is undamaged and not cracked. Replace the

 

X

 

 

trimmer head if necessary.

 

 

 

 

 

 

 

 

 

 

 

 

Check that the locking nut of the cutting equipment is tighten correctly.

 

X

 

 

 

 

 

 

 

Check that the transport guard for the blade is intact and that it can be secured

 

X

 

 

correctly.

 

 

 

 

 

 

 

 

 

 

 

 

Check that nuts and screws are tight.

 

X

 

 

 

 

 

 

 

Check that there are no fuel leaks from the engine, tank or fuel lines.

 

X

 

 

 

 

 

 

 

Check the starter and starter cord.

 

 

X

 

 

 

 

 

 

Check that the vibration damping elements are not damaged.

 

 

X

 

 

 

 

 

 

Clean the outside of the spark plug. Remove it and check the electrode gap.

 

 

 

 

Adjust the gap to 0.5 mm or replace the spark plug. Check that the spark plug

 

 

X

 

is fitted with a suppressor.

 

 

 

 

 

 

 

 

 

Clean the machine’s cooling system.

 

 

X

 

 

 

 

 

 

Clean or replace the spark arrestor mesh on the muffler (only applies to mufflers

 

 

X

 

without a catalytic converter).

 

 

 

 

 

 

 

 

 

 

 

 

Clean the outside of the carburettor and the space around it.

 

 

X

 

 

 

 

 

 

Check that the bevel gear is filled three-quarters full with lubricant. Fill if

 

 

X

 

necessary using special grease.

 

 

 

 

 

 

 

 

 

 

 

 

Check the fuel filter from contamination and the fuel hose from cracks or other

 

 

 

X

defects. Replace if necessary.

 

 

 

 

 

 

 

 

 

 

 

 

Check all cables and connections.

 

 

 

X

 

 

 

 

 

Check the clutch, clutch springs and the clutch drum for wear. Replace if

 

 

 

X

necessary by an autorized service workshop.

 

 

 

 

 

 

 

 

 

 

 

 

Replace the spark plug. Check that the spark plug is fitted with a suppressor.

 

 

 

X

 

 

 

 

 

Check and clean the spark arrestor mesh on the muffler (only applies to mufflers

 

 

 

X

fitted with a catalytic converter).

 

 

 

 

 

 

 

 

 

 

 

 

English – 23

Page 22 Page 24
Page 23
Image 23
Jonsered BC2053, BC2043 manual Maintenance schedule, Maintenance Daily Weekly Monthly
Page 22 Page 24

BC2053, BC2043 specifications

The Jonsered BC2043 and BC2053 are powerful brushcutters designed for both professional landscapers and avid gardening enthusiasts. Known for their robust build and reliability, these machines stand out for their capability to handle a variety of vegetation types, from thick underbrush to tough weeds.

One of the main features of both models is their lightweight design, which allows for easy maneuverability during use. The ergonomic handle layout reduces fatigue, making them suitable for prolonged use without discomfort. The BC2043 weighs approximately 10.5 kg, while the BC2053 is slightly heavier due to its enhanced power capabilities. This thoughtful engineering ensures that users can manage demanding tasks with less strain.

Both models are equipped with a high-performance engine that delivers impressive torque and efficiency. The BC2043 features a 43cc engine, while the BC2053 boasts a more powerful 53cc engine. This increase in capacity allows the BC2053 to handle tougher jobs, enabling users to clear dense brush and thick grass with ease. Additionally, both engines utilize advanced technology for reduced emissions and lower fuel consumption, aligning with modern environmental standards.

An outstanding characteristic of the Jonsered BC2043 and BC2053 is their innovative cutting systems. Equipped with a dual-line cutting head and the option to attach various blades, these machines provide versatility in tackling different types of vegetation. The adjustable cutting width allows users to choose between a narrower cut for precision work or a wider cut for larger areas, significantly improving efficiency.

Maintenance is simplified with these models, as they feature easy-access air filters and convenient starting systems. The quick start technology minimizes pull force required to start the engine, making it user-friendly even for those less experienced with power tools.

In summary, the Jonsered BC2043 and BC2053 represent a perfect blend of power, usability, and innovation. With their ergonomic designs, robust engines, and versatile cutting capabilities, they cater to a wide range of landscaping needs. Whether for professional use or personal gardening projects, both brushcutters deliver exceptional performance and reliability, ensuring that users can achieve excellent results in their outdoor endeavors.
Top Page Image Contents