Manuals / Jonsered / Lawn and Garden / Brush Cutter

Jonsered BC2053 manual Contents, Note the following before starting, Key To Symbols, Introduction

Models: BC2053 BC2043

1 32

Download 32 pages 4.54 Kb

Page 3

CONTENTS

CONTENTS

Contents
KEY TO SYMBOLS
Symbols	2
CONTENTS
Contents	3
Note the following before starting:	3
INTRODUCTION
Dear Customer,	4
WHAT IS WHAT?
What is what?	5
GENERAL SAFETY PRECAUTIONS
Important	6
Personal protective equipment	6
Machine′s safety equipment	7
Cutting equipment	9
ASSEMBLY
Fitting the main body	11
Fitting the handlebar	11
Connecting throttle cable and stop switch wires	11
Assembling the cutting equipment	12
Adjusting the harness and clearing saw	13
Standard harness	13
FUEL HANDLING
Fuel safety	14
Fuel	14
Fuelling	15
STARTING AND STOPPING
Check before starting	16
Starting and stopping	16
WORKING TECHNIQUES
General working instructions	18
MAINTENANCE
Carburettor	21
Mufﬂer	21
Cooling system	21
Air ﬁlter	21
Bevel gear	22
Spark plug	22
Maintenance schedule	23
TECHNICAL DATA
Technical data	24
EC-declaration of conformity	25

Note the following before starting:

Please read the operator’s manual carefully.

WARNING! Long-term exposure to noise can

!result in permanent hearing impairment. So always use approved hearing protection.

WARNING! Under no circumstances may the

!design of the machine be modiﬁed without the permission of the manufacturer. Always use genuine accessories. Non-authorized modiﬁcations and/or accessories can result in serious personal injury or the death of the operator or others.

WARNING! A clearing saw, brushcutter or

!trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

English – 3

Image 3

Jonsered BC2053 manual Contents, Note the following before starting, Key To Symbols, Introduction, What Is What?, Assembly

Contents

Operator′s manual Symbols KEY TO SYMBOLSCONTENTS CONTENTSContents KEY TO SYMBOLSDear Customer INTRODUCTIONWhat is what? WHAT IS WHAT?WARNING! This machine produces an GENERAL SAFETY PRECAUTIONSWARNING! Listen out for warning signals or Personal protective equipmentThrottle lockout Machine′s safety equipmentStop switch WARNING! Never use a machine with faultyWARNING! Never use a cutting attachment Vibration damping systemQuick release MufﬂerCutting equipment WARNING! Using an incorrect cuttingCutting equipment Locking nutGENERAL SAFETY PRECAUTIONS Sharpening grass cutters and grass bladesTrimmer head WARNING! Always discard a blade that isFitting the handlebar ASSEMBLYConnecting throttle cable and stop switch wires Fitting the main bodyFitting the cord cutter and guard extension to the trimmer guard WARNING! When ﬁtting the cuttingB L C M A Assembling the cutting equipmentFitting other guards and cutting attachments Adjusting the harness and clearing sawWARNING! When using a clearing saw it Standard harnessFuel Fuel safetyWARNING! Take care when handling fuel FUEL HANDLINGWARNING! The catalytic converter mufﬂer WARNING! Taking the following precautions will lessen the risk of ﬁreFuelling MixingStarting STARTING AND STOPPINGCheck before starting Starting and stoppingSTARTING AND STOPPING WARNING! When the engine is started withStopping Warm engineBasic working techniques Basic safety rulesWORKING TECHNIQUES General working instructionsClearing Grass clearing using a grass bladeGrass trimming with a trimmer head TrimmingSweeping WORKING TECHNIQUES20 - English Mufﬂer MAINTENANCEAdjusting the idle speed T CarburettorOiling the air ﬁlter Cleaning the air ﬁlterBevel gear Spark plugDaily Maintenance scheduleMaintenance maintenanceBC2043 TECHNICAL DATATechnical data WeightCutting attachment guard, Art. no Approved accessoriesEC-declaration of conformity Applies to Europe only Type20mm Poly Trim6 Nm 20mm15 cm Tap n’ Go 35 Spin8,5 m 10 cm 4,3 m15 cm Tap n’Go 45 Spin10 m 10 cm 4,3 mClic Tap n’Go 55 SpinA B C 15 cm~ 3,5 m Trimmy SII095-.130 7,0 mPage 1152665-26 ´z+TbT¶6v¨ ´z+TbT¶6v¨