|
|
| CONTENTS |
|
1. | OUTLINE | 1 | ||
| 1.1 | Features | 1 | |
| 1.2 | Unpacking | 1 | |
2. | BASIC SPECIFICATIONS | 2 | ||
| 2.1 | Model Classifications | 2 | |
| 2.2 | Basic Specifications | 3 | |
| 2.3 | Paper Specifications | 4 | |
|
| 2.3.1 | Recommended Paper | 4 |
|
| 2.3.2 | Printing Position | 4 |
|
| 2.3.3 | Cutter Layout | 4 |
3. | OUTER APPEARANCE AND COMPONENT PARTS | 5 | ||
| 3.1 | 5 | ||
| 3.2 | 6 | ||
4. | OPERATION | 8 | ||
| 4.1 | Detaching/Attaching the Printer Cover | 8 | |
| 4.2 | Connecting the Interface Cable | 8 | |
| 4.3 | Connecting the Drawer | 9 | |
| 4.4 | Opening/Closing the Auto Cutter | 9 | |
| 4.5 | Setting the Ribbon Cassette | 10 | |
| 4.6 | Inserting the Paper | 11 | |
| 4.7 | Attaching the Rear Cover | 13 | |
| 4.8 | How to Remove Remaining Paper Roll | 13 | |
| 4.9 | Removing Paper Jam | 13 | |
| 4.10 | Unlocking the Cutter | 14 | |
| 4.11 | Operation Panel and Display of Error | 15 | |
5. | DIP SWITCH SETTING | 17 | ||
| 5.1 | Location of DIP Switch | 17 | |
| 5.2 | DIP Switches Setting | 18 | |
6. | PRESET JUMPER SETTING | 20 | ||
| 6.1 | Location of Preset Jumper | 20 | |
| 6.2 | Preset Jumper Table | 20 | |
7. | MODE SETTING METHOD | 21 | ||
8. | INPUT BUFFER BACKUP FUNCTION | 22 | ||
| 8.1 | Buffer Size | 22 | |
| 8.2 | Input Buffer Backup | 22 | |
| 8.3 | Clearing the Input Buffer | 22 | |
9. | PARALLEL INTERFACE | 23 | ||
| 9.1 | Specifications | 23 | |
| 9.2 | Connector's Pin Configuration | 23 | |
| 9.3 | Input and Output Signals | 24 | |
|
| 9.3.1 Input and Output Signals | 24 | |
|
| 9.3.2 | Electrical Characteristics | 25 |
|
| 9.3.3 | Timing Chart | 26 |
Page 12
Image 12
