CR
[Function] | Printing and paper feed (Same as LF) | |
[Code] | <0D>H |
|
[Outline] | The function is the same "LF." However, if the DIP switch segment | |
| command is ignored. |
|
ESC "z" |
|
|
[Function] | Setting the standard line feed width | |
[Code] | <1B>H <7A>H |
|
[Outline] | This command sets the line feed width as follows. | |
| For character type: 1/6 |
|
| For graphic type: | 2/9 inch |
ESC "a" n |
|
|
[Function] | Setting the | |
[Code] | <1B>H <61>H n |
|
[Range] | 1 ≤ n ≤ 127 |
|
[Outline] | This command feeds the paper by the number of lines specified with n. You can set n = 1 to | |
| 127 lines. If the print buffer contains the data, use of this command feeds the paper by n- | |
| lines after printing the data. | |
