Citizen Systems iDP-3550, iDP-3551 user manual ESC p m n1 n2

ESC "p" m n1 n2

[Function]	Specifying the pulse generation
[Code]	<1B>H <70>H m n1 n2
[Range]	0 ≤ m ≤ 1
	0 ≤ n1 ≤ n2 ≤ 255
[Outline]	This command outputs the signals specified with n1 and n2 to the connector pins.
		m	Connector Pin
		0	Drawer kick connector No. 2 pin
		1	Drawer kick connector No. 5 pin
	The ON time is n1×2 mS and the OFF time is n2×2 mS.
[Caution]	The user should consider driving the drawer at the following duty ratio.

ON time ÷ (ON time + OFF time) ≤ 0.2

(It is recommended to make n2 four times higher or more than n1.)

The drawer kick-out solenoid should have a resistance value of 36Ω or more. Do not use a lower one because an overcurrent will flow. For the drawer power, be sure to use the printer power (Drawer kick-out connector No. 4 pin).