Reference
Cable sample
HDMI Cable | Analog Audio Cable (RCA type) |
(not supplied with the product) | (not supplied with the product) |
HDMI to DVI Cable | Analog Audio Cable (Stereo to RCA type) |
(not supplied with the product) | (not supplied with the product) |
How to use
1.Connect the HDMI Source Devices(DVD Player or Set Top Box or PC) and the set.
2.Turn on the display by pressing the POWER button on the set and HDMI Source Devices remote control.
3.Select HDMI Input source in Main Input option of PIP/DW menu.
4.Check the image on your set. There may be noise associated with the resolution, vertical pattern, contrast or brightness in HDMI Source Devices. If noise is present, change the HDMI Source Devices to another resolution, change the refresh rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphics card can not changed, change the PC graphics card or consult the manufacturer of the PC graphics card.
Notes:
-Depending on the graphics card, DOS mode may not work if you use a HDMI to DVI Cable.
-Avoid keeping a fixed image on the set screen for a long period of time. The fixed image may become permanent- ly imprinted on the screen. Use the Orbiter screen saver when possible.
-When Source Devices connected HDMI Input, output PC Resolution(VGA, SVGA, XGA), Position, Size may not fit to Screen. As shown the lower picture, press the MENU button to adjust the screen Position of the set and contact an PC graphics card service center.
-When Source Devices connected HDMI Input output the set Resolution(480p, 720p, 1080i), the set Display fit
-In case HDMI Source Devices is not connected Cable or poor cable connection, "No Signal" OSD display in HDMI Input. And In case of Video Resolution not supported the set output in HDMI Source Devices, "No Signal" OSD dis- play. Refer to the Manual of HDMI Source Devices or contact your service center.
