Citizen Systems iDP-3551 Drawer KICK-OUT Connector, Specifications of Drawer Kick-Out Connector

11. DRAWER KICK-OUT CONNECTOR

11.1Specifications of Drawer Kick-Out Connector

(1)Drawer kick-out drive signal

Parallel	----- Can be learned at the no. 34 pin of the interface connector
Serial	----- Provided with a command to learn the status in the STAR and ESC/POS modes.

(2)Electrical characteristics

1)Drive voltage: 24 V DC

2)Drive current: 0.8 A at maximum (Within 510 ms)

3) Switch signal: Signal level	"L"	= 0 to 0.5 V
	"H"	= 3 to 5 V

11.2Connector's Pin Configuration

No.	Signal	Function
1	FG	Frame Ground
2	DRAWER 1	Drawer 1 drive signal
3	DRSW	Drawer switch input
4	VDR	Drawer drive power
5	DRAWER 2	Drawer 2 drive signal
6	GND	Common ground on the circuit

Connector used		: TM5RJ3-66 (HIROSE)
Applicable connector		: TM3P-66P (HIROSE) or equivalent
CAUTION : •	No output is made while printing.
•	The drawers 1 and 2 cannot be driven simultaneously.

•A solenoid used for the drawer should be of 36Ω or more. An output current should be kept below 0.8 A. Use beyond this limit cannot be assured.

•This connector cannot be connected to a telephone line. Do not connect other than the solenoid.

11.3Drive Circuit