Citizen Systems iDP-3550, iDP-3551 user manual ESC c 4 n, ESC c 5 n, ESC d n

ESC "c" "4" n

[Function]	Selecting the paper near end sensor valid for print stop
[Code]	<1B>H<63>H<34>H n
[Range]	0 ≤ n ≤ 255
[Outline]	This command selects the no-paper detector state in which printing should be stopped.
		Bit	Function		Value
				0		1
		0	Paper near end	Disabled		Enabled
		1	Undefined	−		−
		2	Undefined	−		−
		3	Undefined	−		−
		4	Undefined	−		−
		5	Undefined	−		−
		6	Undefined	−		−
		7	Undefined	−		−
[Default]	n = 0
ESC "c" "5" n
[Function]	Selecting the panel switch enable/disable
[Code]	<1B>H <63>H <35>H n
[Range]	0 ≤ n ≤ 255
[Outline]	This command enables/disables the panel switches. n is valid only for the least significant
	bit.
		Setting n = 1 disables the panel switches.
		Setting n = 0 enables the panel switches.
[Caution]	If the panel switches are disabled with this command, the LF switch will be disabled.
	Therefore, the paper cannot be fed by the LF switch.
[Default]	n = 0
ESC "d" n
[Function]	Printing and n-line paper feed
[Code]	<1B>H <64>H n
[Range]	0 ≤ n ≤ 255
[Outline]	This command feeds the paper by n-lines after printing the one line worth of data saved in the
	print buffer.