
CR
[Function] | Printing |
[Code] | <0D>H |
[Outline] | This command prints the data. If the DIP switch segment |
| print the data in the print buffer and feed the paper by one line. If it is set to ON, the printer |
| will print the data in the print buffer and will not feed the paper. |
ESC " " n |
|
[Function] | Setting the character right space |
[Code] | <1B>H <20>H n |
[Range] | 0 ≤ n ≤ 32 |
[Outline] | This command sets the right space of the character. |
[Caution] | In the double width mode, the right space will be double the set amount. Set the space in |
| increments of half dot. |
[Default] | n = 0 |