ESC "y" n
[Function] | Setting the print lines after paper near end detection |
[Code] | <1B>H<79>H n |
[Range] | 0 ≤ n1 ≤ 255 |
[Outline] | This command sets the number of print lines after paper near end detection. It stops printing |
| after printing n × 2 lines since detection of the paper near end, resulting in the paper near end |
| state (See 4.11 Operation Panel and Display of Error). The PE signal (parallel interface only) |
| changes when the paper near end is detected. |
[Default] | n = 0 |
ESC DC2 n1 n2
[Function] | Deleting the download character, message, bit image | ||||
[Code] | <1B>H <12>H n1 n2 | ||||
[Range] | 0 | ≤ n1≤ 3 |
|
| |
| 0 | ≤ n2 | (Specify 0 at n1 = 0) | ||
|
|
|
| (1 ≤ n2 ≤ 10 at n1 = 1) | |
|
|
|
| (32 ≤ n2 ≤ 224 at n1 = 2) | |
|
|
|
| (Specify 0 at n1 = 3) | |
[Outline] | This command deletes the downloaded characters, message, and bit image. | ||||
|
|
|
|
|
|
|
| n1 |
| Object Deleted |
|
0All(Message, characters, bit image)
1Download message
2Download characters
3Download bit image
With n2, specify which data of the function specified with n1 should be deleted.
n2 = 0 Deletes all the download function specified with n1.
n2 ≠ 0 Deletes the data downloaded at the value specified with n2 (value specified when saving with each download command), of the download function specified with n1.
