ESC "v"
[Function] | Sending the printer status |
|
|
|
| ||
[Code] | <1B>H <76>H |
|
|
|
| ||
[Outline] | This command sends the printer status. |
|
| ||||
[Caution] | This command is valid only for the serial interface. The following table lists the status sent. | ||||||
| In case of DTR/DSR control, only one byte will be sent after confirming that the host is ready | ||||||
| to receive (DSR signal has the Space status). |
|
| ||||
| The status at command processing time is sent after processing the data received prior to this | ||||||
| command. If the printing is under way when the command is being processed, however, the | ||||||
| then status will be sent after completing print feed of that line. Therefore, it may take time to | ||||||
| send the status after receiving the command. |
|
| ||||
|
|
|
|
|
|
|
|
|
| Bit | Function | Value |
|
| |
|
| 0 |
| 1 |
| ||
|
|
|
|
|
| ||
|
| 0 | Paper near end | With paper |
| Near end |
|
|
| 1 | Undefined |
|
|
|
|
|
| 2 | Paper near end | With paper |
| End |
|
|
| 3 | Undefined |
|
|
|
|
|
| 4 | Undefined | 0 stationary |
| − |
|
|
| 5 | Undefined |
|
|
|
|
|
| 6 | Undefined |
|
|
|
|
