[Outline] | This command cancels the double width characters set with SO. | The data following this |
| command are printed in the ordinary character width. |
|
SI |
| (CBM2 Mode) |
[Function] | Canceling the double width character/Specifying the | |
[Code] | <0F>H |
|
[Outline] | This command cancels the double width characters set with SO. | The data following this |
| command are printed in the ordinary character width. |
|
LF | In the case of a serial interface, if | |
|
| |
|
|
|
[Function] | Printing and paper feed |
|
[Code] | <0A>H |
|
[Outline] | If the print buffer contains the data, this command will feed the line after printing. If not, the | |
| command only feeds the line. |
|
CR |
|
|
|
|
|
[Function] | Printing |
|
[Code] | <0D>H |
|
[Outline] | This command prints the data. If the DIP switch segment | |
| print the data in the print buffer and feed the paper by one line. |
|
| If it is set to ON, the printer will print the data in the print buffer and will not feed the paper. | |
DC1 |
| (CBM1 Mode) |
[Function] | Initializing the printer |
|
[Code] | <11>H |
|
[Outline] | This command initializes the printer. |
|
| The input buffer is not cleared. |
|
| The settings of the DIP switch segments are not |
|