
| ESC "2" |
| (Character Type) |
|
| [Function] | Setting the standard line feed width | ||
| [Code] | <1B>H <32>H |
|
|
| [Outline] | This command sets the following line feed width. | ||
|
| For charactor type: | 1/6 inch. | |
|
| For graphic type: | 2/9 inche | |
| ESC "3" n |
| (Graphic Type) | |
|
|
|
| |
| [Function] | Setting the line feed width in minimum pitch increments | ||
| [Code] | <1B>H <33>H n |
|
|
| [Outline] | This command is only effective for graphic type. This command sets the line feed width to | ||
|
| n/9 inch. |
|
|
| [Default] | n = 2 |
|
|
| ESC "@" |
|
|
|
|
|
|
|
|
| [Function] | Initializing the printer |
|
|
| [Code] | <1B>H <40>H |
|
|
| [Outline] | This command cancels various conditions set after | ||
|
| conditions having existed at | ||
|
| device drive pulse width are not initialized. The settings of the DIP switch segments are not | ||
|
|
|
|