Hitachi 26LD8000TA user manual Self Diagnosis Function, If you cannot turn on the TV, Poor picture

Page 36
Self Diagnosis Function

Self Diagnosis Function

If a problem arises while you are using the television, please read this self diagram function guide carefully before you ask to have the television repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the television aerial has problems, you may think there is a problem with the telivision itself.

Important:

zThis self diagram function guide only covers problems whose causes are not easy to decide. If you have a question when you are operating a function, read the page(s) for that function carefully, not this self diagram function guide.

zIf you follow the advice in this self diagram function guide without any success, unplug the mains plug and ask your television to be repaired. Do not attempt tp repair the television by yourself or to remove the rear cover of the television.

If you cannot turn on the TV:

zAre the AC plug on the power cordfrom the television is connected to AC outlet?

Poor picture:

zIf noise totally blocks out the picture , there may be a problem with the aerial or the aerial cable. Check the following to try to solve the problem:

-Have the television and aerial been connected properly?

-Has the aerial cable been damaged?

-Is the aerial pointing in the right direction?

-Is the aerial itself faulty?

zIf the television or aerial suffers interface from other equipment, stripes or noise may appear in the picture. Move any equipment such as an amplifier, personal computer, or a hair drier, that can cause interference away from your television. Or try moving the television. If the aerial suffers interference from a ratio tower or high-voltage wire, please contact your local dealer.

zIf the television suffers interference from signals reflecting from mountains or buildings, double-pictures(ghosting) will occur. Try to change the aerial’s direction or replace it with one with better directionality.

zHave the COLOR and BRIGHTNESS settings been adjusted properly? Follow the description “PICTURE ADJUSTMENT” to try to adjust them properly.

zVideotaping teletext is not recommended because it may not record correctly.

zWhen viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal. There is nothing wrong with the television.

Poor sound:

zHave you adjusted BASS or TREBLE properly? If not, follow the description “SOUND ADJUSTMENT”.

If the TV does not respond to the remote control:

zHave the batteries of the remote control worn out? Follow the description “PUTTING THE BATTERIES INTO THE ROMOTE CONTROL” and replace them with new batteries.

zHave you attempted to use the remote control from the sides or rear of the television or from more than seven metersaway from the television? Use the remote control in the front of your television or from less than seven meters away.

zIf the television suddenly stops responding, disconnect the power cord of the television from the AC outlet. Connect them to the AC outlet again to turn on the television. If the television returns to a normal state, it is not a failure.

34

Image 36
Contents USERS MANUAL 26LD8000TAColor LCD TV SERIAL NOTRADEMARK ACKNOWLEDGEMENT ENGLISH Notes on lnstallation WorkNote for Dealers USERS MANUALFEATURES Easy-to-use remote control and on screen display systemPower saving system Connecting to an Audio Visual DeviceCONTENTS SAFETY INSTRUCTIONS About the SymbolsTypical Symbols Never use the television if a problem should occurSAFETY INSTRUCTIONS continued About the Symbols continued Be cautious of the power cord connectionBe sure to keep safety ground connection Be careful in handling the power cord and external connection cablesPRECAUTIONS Remove the power cord for complete separationInstallation environment How to view the televisionPrecautions for the cable connection Precaution during transportationDo not physically impact the remote control Set the sound volume at a suitable levelAbout the Symbols continued Using in low temperaturesAbout screen defects About residual imagesACCESSORIES REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENTREMOTE CONTROL POWER CORD USER’S GUIDEHOW TO SETUP YOUR NEW HITACHI LCD TELEVISION POWER CORDCaution when moving the main unit ANTENNALOCATION FRONT PANEL CONTROLS Front VIEWTOP SIDE PANEL CONTROLS TOP SIDE VIEWVOLUME level 6XESOWER buttonREAR PANEL MAIN POWER SWITCH & JACKS 26” LCD TelevisionRear View a Normal mode SIDE PANEL CONTROLS SIDE VIEWVIDEO CONNECTING EXTERNAL SOURCES z Before connecting anything Turn off all the equipment Connecting cables are not suppliedPOWER CORD A. DVD player component / composite / S-VIDEO signal B. Subwoofer C. PC D. VCR player composite / S-VIDEO signal E. Cam-coderF. Headphone Remote Control Buttons and Functions Turn the Television On or OffChoose a Television Channel Adjust the Volume Watch Images from External EquipmentDisplaying the Source Information Sleep Timer Function Aspect RatioPicture Mode POP / PIP FUNCTIONS 3. Press the POSITION button to change the position of sub picture CANCEL Teletext FunctionBasic Operation Sub-pageOSD On-Screen Display Operation with the buttons on the TVPicture Setting Sound Settingz Sound Adjustment z Picture AdjustmentInitial Setup z Languagez MANUAL z Auto Channel Scanz Channel List NAMEINSERT DELETE z Picture Position Adjustmen z Picture Adjustmen26LD8000TA/ PC Supported Mode List PC Picture PositionAUDIO z Sound Adjustment Self Diagnosis Function If the TV does not respond to the remote controlIf you cannot turn on the TV Poor pictureOther concerns PRODUCT SPECIFICATIONS TemperatureOperating5̓C to 35̓˖ʿʳ˦̇̂̅˴˺˸ʳˍʳ˃̓˖ʳ̇̂ʳˇ˃̓˖ Relative humidityPRODUCT SPECIFICATIONS continued Signal Input RGB terminal D-sub 15-pin connectorS-input connector pin specifications 3LQ Applicable video signals for input terminal TV mode TerminalRCA/S-video D-subWith Analog signal input RGB input Width
Related manuals
Manual 54 pages 481 b Manual 40 pages 29.95 Kb