Hitachi 26LD8000TA user manual SAFETY INSTRUCTIONS continued About the Symbols continued, English

Page 9
Prevention of an obstacle to Radio receivers

SAFETY INSTRUCTIONS (continued)

About the Symbols (continued)

Prevention of an obstacle to Radio receivers

This television has been designed pursuant to the international EMI standards. This is to prevent a problem to Radio receivers.

Keep the television away from Radio.

Adjust Radio antennas in order for the television not to receive interference.

The antenna cable of Radio should be kept away from the television.

Use a coaxial cable for antenna.

You can check if this television influences Radio receivers by turning off all other equipment other than the television. If you find a problem receiving Radio when using the television, check the instructions mentioned above.

Precautions for the cable connection

Do ensure that all connections, (including the power plug, extension leads and interconnections between the pieces of equipment), are properly made and in accordance with the manufacturers instructions. Switch off and withdraw the power plug before making or changing connections.

Confirm the connector is fixed tightly when the signal cable is connected. Also confirm the screws on the connector are tightened.

Plug the power cord of the television into a different socket from that for other equipment, such as Radio etc.

Use a plug with ground terminal and make sure that it connects to the ground.

Precaution during transportation

Please pay attention when you transport this television because it is heavy.

Furthermore, use the original carton box and its packaging materials when the television is transported. Failure to transport the television in any carton except the original carton may result in damage to the television. Save the original carton box and all packing material.

Do not physically impact the remote control.

A physical impact could cause damage or malfunction of the remote control.

Take care not to drop the remote control.

Do not place heavy objects on the remote control.

Avoid strong rays.

Any strong rays (such as direct sun rays or room lighting) onto the remote control sensors could invalidate the remote control.

Avoid radio interference.

Any interfering radiation could cause distorted images or noises.

• Avoid radio generator such as a mobile telephone, transceiver, etc. around the television.

Set the sound volume at a suitable level.

It is better to keep the volume level low and close the windows at night to protect the neighborhood environment.

Precautions for the installation

Do not use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety, always fit the manufacturers approved stand or legs with the fixings provided according to the instructions.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

This product is designed to comply with the recommended safety standards for tilt and stability. Do not apply excessive pulling force to the front, or top, of the cabinet that could cause the product to overturn resulting in product damage and/or personal injury.

Follow instructions for wall, shelf or ceiling mounting as recommended by the manufacturer.

Only use the attachments/accessories specified by the manufacturer.

Consult your dealer if you are in any doubt about installation, operation or safety of your equipment.

Other precautions

Do not leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equipment and show your family how to do this. Make special arrangements for infirm or handicapped people.

Disposal of this product may require specific instructions pertaining to your resident region.

Never guess or take any chances with electrical equipment of any kind - it is better to be safe than sorry!

ENGLISH

7

Image 9
Contents 26LD8000TA USERS MANUALColor LCD TV SERIAL NOTRADEMARK ACKNOWLEDGEMENT Notes on lnstallation Work ENGLISHNote for Dealers USERS MANUALEasy-to-use remote control and on screen display system FEATURESPower saving system Connecting to an Audio Visual DeviceCONTENTS About the Symbols SAFETY INSTRUCTIONSTypical Symbols Never use the television if a problem should occurBe cautious of the power cord connection SAFETY INSTRUCTIONS continued About the Symbols continuedBe sure to keep safety ground connection Be careful in handling the power cord and external connection cablesRemove the power cord for complete separation PRECAUTIONSInstallation environment How to view the televisionPrecaution during transportation Precautions for the cable connectionDo not physically impact the remote control Set the sound volume at a suitable levelUsing in low temperatures About the Symbols continuedAbout screen defects About residual imagesREMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT ACCESSORIESREMOTE CONTROL POWER CORD USER’S GUIDEPOWER CORD HOW TO SETUP YOUR NEW HITACHI LCD TELEVISIONCaution when moving the main unit ANTENNALOCATION Front VIEW FRONT PANEL CONTROLSTOP SIDE VIEW TOP SIDE PANEL CONTROLSVOLUME level 6XESOWER buttonREAR PANEL MAIN POWER SWITCH & JACKS 26” LCD TelevisionRear View a Normal mode SIDE PANEL CONTROLS SIDE VIEWVIDEO CONNECTING EXTERNAL SOURCES z Before connecting anything Turn off all the equipment Connecting cables are not suppliedPOWER CORD A. DVD player component / composite / S-VIDEO signal B. Subwoofer C. PC D. VCR player composite / S-VIDEO signal E. Cam-coderF. Headphone Remote Control Buttons and Functions Turn the Television On or OffChoose a Television Channel Adjust the Volume Watch Images from External EquipmentDisplaying the Source Information Sleep Timer Function Aspect RatioPicture Mode POP / PIP FUNCTIONS 3. Press the POSITION button to change the position of sub picture Teletext Function CANCELBasic Operation Sub-pageOperation with the buttons on the TV OSD On-Screen DisplaySound Setting Picture Settingz Sound Adjustment z Picture Adjustmentz Language Initial Setupz MANUAL z Auto Channel ScanNAME z Channel ListINSERT DELETE z Picture Adjustmen z Picture Position Adjustmen26LD8000TA/ PC Supported Mode List PC Picture PositionAUDIO z Sound Adjustment If the TV does not respond to the remote control Self Diagnosis FunctionIf you cannot turn on the TV Poor pictureOther concerns Temperature PRODUCT SPECIFICATIONSOperating5̓C to 35̓˖ʿʳ˦̇̂̅˴˺˸ʳˍʳ˃̓˖ʳ̇̂ʳˇ˃̓˖ Relative humidityRGB terminal D-sub 15-pin connector PRODUCT SPECIFICATIONS continued Signal InputS-input connector pin specifications 3LQ Terminal Applicable video signals for input terminal TV modeRCA/S-video D-subWidth With Analog signal input RGB input
Related manuals
Manual 54 pages 481 b Manual 40 pages 29.95 Kb