Hitachi 26LD8000TA user manual SAFETY INSTRUCTIONS continued About the Symbols continued, English

Page 7
SAFETY INSTRUCTIONS (continued)

SAFETY INSTRUCTIONS (continued)

About the Symbols (continued)

Be cautious of the power cord connection.Be sure to keep safety ground connection.WARNING

Be cautious of the power cord connection.

Incorrect connection of the power cord could result in fire or electrical shock.

Do not touch the power cord with a wet hand.

Check that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry cloth to clean the power plug.

Insert the power plug into a power outlet firmly. Avoid using a loose, unsound outlet or contact failure.

• Do not cut off the fitted power plug, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate extension lead or consult your dealer.

Should you require replacing the fuse in the molded plug with a new fuse, then please replace with new one of the same value, type and approval as the original. Ensure the fuse cover is returned to its original position.

Be sure to keep safety ground connection.

Connect the ground terminal of AC inlet of this television with the ground terminal provided at the power outlet using the enclosed power cord. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.

Surely connect the ground wire.

Be careful in handling the power cord and external connection cables.

If you keep using a damaged the power cord or cables, it can cause a fire or electrical shock. Do not apply too much heat, pressure or tension to the power cord and cables.

If the power cord or cables are damaged (exposed or broken core wires, etc.), contact your dealer.

Do not place the television or heavy objects on the power cord and cables. Also, do not place a spread, cover, etc, over them because this could result in the inadvertent placing of heavy objects on the concealed power cord or cables.

• Do not pull the power cord and cables. When connecting and disconnecting the power cord or cables, do it with your hand holding the plug or connector.

Do not place the cord near the heater.

Do not touch the power plug just after disconnecting it from the power outlet to prevent electric shock.

Do not touch the power plug when lightening is close to you.

Avoid coiling the power cord and bending it sharply.

Protect the power cord from being walked on, pinched particularly at plugs, conveniences receptacles, and the point where they exit from the apparatus.

Do not modify the power cord.

Be careful in handling the battery of the remote control.

Incorrect handling of the battery could result in fire or personal injury. The battery may explode if not handled properly.

• Keep the battery away from children and pets. If swallowed consult a physician immediately for emergency treatment.

• Do not allow the battery to be exposed to fire or water.

Avoid fire or high-temperature environment.

Do not hold the battery with metallic tweezers.

Keep the battery in a dark, cool and dry place.

Do not short circuit the battery.

Do not recharge, disassemble or solder the battery.

Do not physically impact the battery.

Use only the battery specified in the manual of this television .

Make sure the plus and minus terminals are correctly aligned when loading the battery.

If you observe a leakage of the battery, wipe out the liquid and then replace the battery. If the liquid adheres your body or clothes, rinse well with water.

Obey the local laws on disposing the battery.

ENGLISH

5

Image 7
Contents SERIAL NO USERS MANUAL26LD8000TA Color LCD TVTRADEMARK ACKNOWLEDGEMENT USERS MANUAL ENGLISHNotes on lnstallation Work Note for DealersConnecting to an Audio Visual Device FEATURESEasy-to-use remote control and on screen display system Power saving systemCONTENTS Never use the television if a problem should occur SAFETY INSTRUCTIONSAbout the Symbols Typical SymbolsBe careful in handling the power cord and external connection cables SAFETY INSTRUCTIONS continued About the Symbols continuedBe cautious of the power cord connection Be sure to keep safety ground connectionHow to view the television PRECAUTIONSRemove the power cord for complete separation Installation environmentSet the sound volume at a suitable level Precautions for the cable connectionPrecaution during transportation Do not physically impact the remote controlAbout residual images About the Symbols continuedUsing in low temperatures About screen defectsPOWER CORD USER’S GUIDE ACCESSORIESREMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT REMOTE CONTROLPOWER CORD HOW TO SETUP YOUR NEW HITACHI LCD TELEVISIONANTENNA Caution when moving the main unitLOCATION Front VIEW FRONT PANEL CONTROLS6XESOWER button TOP SIDE PANEL CONTROLSTOP SIDE VIEW VOLUME level26” LCD Television REAR PANEL MAIN POWER SWITCH & JACKSRear View a Normal mode SIDE VIEW SIDE PANEL CONTROLSVIDEO CONNECTING EXTERNAL SOURCES Turn off all the equipment Connecting cables are not supplied z Before connecting anythingPOWER CORD C. PC D. VCR player composite / S-VIDEO signal E. Cam-coder A. DVD player component / composite / S-VIDEO signal B. SubwooferF. Headphone Turn the Television On or Off Remote Control Buttons and FunctionsChoose a Television Channel Watch Images from External Equipment Adjust the VolumeDisplaying the Source Information Aspect Ratio Sleep Timer FunctionPicture Mode POP / PIP FUNCTIONS 3. Press the POSITION button to change the position of sub picture Sub-page CANCELTeletext Function Basic OperationOperation with the buttons on the TV OSD On-Screen Displayz Picture Adjustment Picture SettingSound Setting z Sound Adjustmentz Auto Channel Scan Initial Setupz Language z MANUALNAME z Channel ListINSERT DELETE PC Picture Position z Picture Position Adjustmenz Picture Adjustmen 26LD8000TA/ PC Supported Mode ListAUDIO z Sound Adjustment Poor picture Self Diagnosis FunctionIf the TV does not respond to the remote control If you cannot turn on the TVOther concerns Relative humidity PRODUCT SPECIFICATIONSTemperature Operating5̓C to 35̓˖ʿʳ˦̇̂̅˴˺˸ʳˍʳ˃̓˖ʳ̇̂ʳˇ˃̓˖3LQ  PRODUCT SPECIFICATIONS continued Signal InputRGB terminal D-sub 15-pin connector S-input connector pin specificationsD-sub Applicable video signals for input terminal TV modeTerminal RCA/S-videoWidth With Analog signal input RGB input
Related manuals
Manual 54 pages 481 b Manual 40 pages 29.95 Kb