Hitachi 28LD5000TA user manual Video Unit Function, Connecting to a Video Imaging Device

Page 28

Video Unit Function

INSTALLATION INSTRUCTIONS

Connecting to a Video Imaging Device

(1)Make sure that the power switch of the monitor is turned off.

(2)Make sure that the power switch of the imaging device is turned off.

(3)Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this device and the signal output terminal of the imaging device.

To audio input terminals	To composite input terminal
	VCR

Monitor rear panel

Speaker (R)

Speaker (L)

Power cord

DVD player							DVD player

To SCART terminal

Set-Top Box

To audio output terminals	To composite output terminal	To S video output terminal
	VCR

To component input terminals

To component output terminals

To audio output terminals

To SCART terminals

To RGB,

video and audio input terminals

[An example of connecting video imaging devices]

Use if the video equipment has an

S video

input terminal

With DVI-STB and RGB component setup

To component video equipments.

Please use the connection cable suitable for the terminal form of video equipment.

•If video equipment with an S video output terminal is used, cabling by the S video cable is recommended to provide finer video quality. (If the S video input terminal and the video input terminal of AV3 connect to the monitor at the same time, S video input would govern.)

•If the OUTPUT (MONITOR) terminal is connected to an external monitor with a 75 Ohm terminal, it is possible to view the same image as on the main unit. But it is possible to monitor only the composite video signal from AV1, AV2, AV3, or AV4 input that is displayed on the screen at the time.

Applicable video signals for each input terminal (See PRODUCT SPECIFICATIONS for details.							49 )
Terminal	RCA/SCART		DVI	D-sub	Remarks
Signal	CVBS S-video Component RGB	PC	STB	RGB Component
AV1
AV2					Refer to Setup Menu.	35
AV3
AV4					Refer to Setup Menu.	35
RGB1					Refer to Setup Menu.	36
RGB2					Refer to Setup Menu.	36
						(	: Available)

28

Image 28

Contents 28LD5000TA 28 LCD TV Features Contents Safety Instructions About the SymbolsBe cautious of the power cord connection Be sure to keep safety ground connectionBe careful in handling the battery of the remote control To Earth Fuse Blue to Neutral Cord ClampSafety Instructions Precautions for the cable connection Precaution during transportationDo not physically impact the remote control Set the sound volume at a suitable levelComponent Names Main UnitHandling the Remote Control Remote controlLoading Batteries Component Names Remote control EthInstallation Instructions InstallationAnti-tumble measures Securing to a wall or pillarConnecting to a PC Monitor rear panelEnglish Turning Power On and Off Indicating Power status OperatingOperating Instructions Indicating lampOperating Instructions Volume Adjustment Input SwitchingVolume UP/DOWN buttons Audio MuteSize Switching Input Signal Screen DisplayDisplay area selection diagram RGB input Normal Full Zoom1 Real* Zoom3 Zoom2Using the Menu Screen Operating InstructionsOn-screen display system Press the Return button to return to the previous screenPicture Menu Timer Menu Audio MenuFunction Menu Setup Menu Other Features Language MenuAutomatic Store Select a language by Select buttons and press the OK buttonOther Features Signal Check Power Save ModeWhen the RGB, RGB2 input is selected Status Display ActionAbout using in a low ambient temperature About screen defectsAbout residual images About the panel screenTroubleshooting Symptoms That Seemingly Appear to be FailuresSymptom Point to check Check the way the signal cable is connectedPage Troubleshooting Actions to Correct Abnormal Displays Connecting to a Video Imaging Device An example of connecting video imaging devicesWith DVI-STB and RGB component setup Video Unit FunctionDisplay size selection diagram Using a wide-screen monitor ZoomC149L and 149Zoom Position +Operating Instructions Displaying Multi Picture Activating the Split mode from the video input screenPictures Split YNR Operating Instructions Picture Menu Video Power Save Off Default Zoom Panoramic RGBSystem Colour SystemVideo Input AV2 1st stepPreviously recorded items will be lost During VCR special playback fast forward, rewind Symptom Point to check SeeOutput Tuner Unit funchion Buttons for Teletext ModeSUB page buttons Connecting Antenna Precautions when connecting the antennaInput Select button of the monitor or the remote control During TV modeAuto Full Zoom 149Zoom C149L ButtonActivating the Split mode from the TV screen Pictures Split 4 pictures 12 picturesSound mode PicturesDisplay will go out in approximately 6 seconds TV position NameFreeze button Picture FreezingSplit Strobe During TV mode MenuOperating Instructions Setup Menu During Video signal inputOther Functions A2 / Nicam / Sound MultiplexBilingual / Dual sound broadcast Stereo sound broadcastOperating Instructions Other Functions DVD Player SelectionExample Recall buttonSymptom Possible reason Remedy Snowy picture poor soundMultiple images sound O.K Intermittent interferenceProduct Specifications Signal Input RGB terminal D-sub 15-pin connectorInput connector pin specifications Scart connector pin specificationsProduct Specifications Recommended Signal List Signal mode Horizontal Dot clock Remarks Resolution Vertical frequencyWith R, G, B Video input AV2 and AV4 input With component input AV1, AV2 and RGB2-component inputThis guarantee does not affect your statutory rights