Hitachi 28LD5000TA user manual Safety Instructions, About the Symbols

Page 4

SAFETY INSTRUCTIONS

This LCD monitor has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

Before using this product, please read and understand the Safety Instructions thoroughly to ensure correct usage, and follow all the instructions.

About the Symbols

Various symbols are used in this manual, the user’s manual and on the product itself to ensure correct usage, to prevent danger to the user and others, and to prevent property damage. The meanings of these symbols are described below. It is important that you read these descriptions thoroughly and fully understand the contents.

WARNING

CAUTION

Typical Symbols

This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.

This symbol indicates information that, if ignored, could result possibly in personal injury or physical damage due to incorrect handling.

This symbol indicates an additional warning (including cautions). An illustration is provided to clarify the contents.

This symbol indicates a prohibited action. The contents will be clearly indicated in an illustration or nearby (the symbol to the left indicates that disassembly is prohibited).

This symbol indicates a compulsory action. The contents will be clearly indicated in an illustration or nearby (the symbol to the left indicates that the power plug should be disconnected from the power outlet).

WARNING

Never use the monitor if a problem should occur.

Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing, elements, cables, penetration of liquids or foreign matter, etc. can cause a fire or electrical shock.

In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact your dealer. Never attempt to make repairs yourself because this could be dangerous.

Disconnect the

plug from the power outlet.

Do not insert liquids or foreign objects.

Penetration of liquids or foreign objects could result in fire or electrical shock. Use special caution in households where children are present.

If liquids or foreign objects should enter the projector, immediately turn off the power switch, disconnect the power plug from the power outlet and contact your dealer.

Do not place the monitor in a bathroom.

Do not expose the monitor to rain or moisture.

Do not place flower vases, pots, cups, cosmetics, liquids such as water, etc on or around the monitor.

Do not place metals, combustibles, etc on or around the monitor.

Never disassemble or modify the monitor.

The monitor contains high voltage components. Modification could result in fire or electrical shock.

• Never remove any fixed cover.

Do not

disassemble.

Do not give the monitor any shock or impact.

If the monitor should be shocked and/or broken, it could result in an injury, and continued use could result in fire or electrical shock. If the glass panel is broken or damaged, immediately turn off the power switch, disconnect the power plug from the power outlet and contact your dealer.

Do not place the monitor on an unstable surface.

If the monitor should be dropped and/or broken, it could result in an injury, and continued use could result in fire or electrical shock.

• Do not place the monitor on an unstable, slant or vibrant surface such as a wobbly or inclined stand.

Do not obstruct the ventilation of the monitor.

If the ventilation is obstructed during the operation of the monitor or just after switching off the power, it could result in damage and shorten the lifespan of your monitor due to overheating. Make sure there is ample ventilation.

Keep a space of 100mm (10cm) or more between the sides, rear and top of the monitor and other objects such as walls.

Do not place anything around ventilation openings of the monitor.

Never block ventilation openings.

Do not put the LCD screen side up.

Do not cover the monitor with a tablecloth, etc.

Do not place the monitor on a carpet or bedding, or near a curtain.

Use only the correct power outlet.

Incorrect power supply could result in fire or electrical shock. Use only the correct power outlet depending on the indication on the monitor and the safety standard.

• The enclosed power cord must be used depending on the power outlet to be used.

4

Image 4
Contents 28LD5000TA 28 LCD TV Features Contents Safety Instructions About the SymbolsBe cautious of the power cord connection Be sure to keep safety ground connectionBe careful in handling the battery of the remote control To Earth Fuse Blue to Neutral Cord ClampSafety Instructions Precautions for the cable connection Precaution during transportationDo not physically impact the remote control Set the sound volume at a suitable levelComponent Names Main UnitHandling the Remote Control Remote controlLoading Batteries Component Names Remote control EthInstallation Instructions InstallationAnti-tumble measures Securing to a wall or pillarConnecting to a PC Monitor rear panelEnglish Turning Power On and Off Indicating Power status OperatingOperating Instructions Indicating lampOperating Instructions Volume Adjustment Input SwitchingVolume UP/DOWN buttons Audio MuteSize Switching Input Signal Screen DisplayDisplay area selection diagram RGB input Normal Full Zoom1 Real* Zoom3 Zoom2Using the Menu Screen Operating InstructionsOn-screen display system Press the Return button to return to the previous screenPicture Menu Timer Menu Audio MenuFunction Menu Setup Menu Other Features Language MenuAutomatic Store Select a language by Select buttons and press the OK buttonOther Features Signal Check Power Save ModeWhen the RGB, RGB2 input is selected Status Display ActionAbout using in a low ambient temperature About screen defectsAbout residual images About the panel screenTroubleshooting Symptoms That Seemingly Appear to be FailuresSymptom Point to check Check the way the signal cable is connectedPage Troubleshooting Actions to Correct Abnormal Displays Connecting to a Video Imaging Device An example of connecting video imaging devicesWith DVI-STB and RGB component setup Video Unit FunctionDisplay size selection diagram Using a wide-screen monitor ZoomC149L and 149Zoom Position +Operating Instructions Displaying Multi Picture Activating the Split mode from the video input screenPictures Split YNR Operating Instructions Picture Menu Video Power Save Off Default Zoom Panoramic RGBSystem Colour SystemVideo Input AV2 1st stepPreviously recorded items will be lost During VCR special playback fast forward, rewind Symptom Point to check SeeOutput Tuner Unit funchion Buttons for Teletext ModeSUB page buttons Connecting Antenna Precautions when connecting the antennaInput Select button of the monitor or the remote control During TV modeAuto Full Zoom 149Zoom C149L ButtonActivating the Split mode from the TV screen Pictures Split 4 pictures 12 picturesSound mode PicturesDisplay will go out in approximately 6 seconds TV position NameFreeze button Picture FreezingSplit Strobe During TV mode MenuOperating Instructions Setup Menu During Video signal inputOther Functions A2 / Nicam / Sound MultiplexBilingual / Dual sound broadcast Stereo sound broadcastOperating Instructions Other Functions DVD Player SelectionExample Recall buttonSymptom Possible reason Remedy Snowy picture poor soundMultiple images sound O.K Intermittent interferenceProduct Specifications Signal Input RGB terminal D-sub 15-pin connectorInput connector pin specifications Scart connector pin specificationsProduct Specifications Recommended Signal List Signal mode Horizontal Dot clock Remarks Resolution Vertical frequencyWith R, G, B Video input AV2 and AV4 input With component input AV1, AV2 and RGB2-component inputThis guarantee does not affect your statutory rights