Switching The TV ON/OFF
To switch the TV on
Your TV will switch on in two steps:
1- Connect the power cord to the system. Press Power On/Off switch. Then the TV switches itself to
2- To switch on the TV from
Press a digit button on the remote control so that a programme number is selected, or Press the
By either method the TV will switch on.
To switch the TV off
•Press the “
To power down the TV completely, press On/Off switch
or,
Unplug the power cord from the mains socket.
Navigating the Menu System
1- Press 
to display the menu.
2- Press _ / ‾ button to select an icon.
3- Use α / β button to highlight. Press ‾ for more options in analogue TV mode. Use OK in DTV mode for viewing a submenu.
4- Press _ / ‾ buttons to change the settings. Press OK to set as default.
5- To exit the menu or return from
press 
.
These explanations are available for the navigation of the whole menu system. To select options that are explained in the following parts, refer to “Navigating The Menu System”.
Initial Settings
When the TV is turned on for the first time, it is in the digital mode.
Because this is the first time the TV is used, there are no channels stored in the memory and the following message appears on the screen.
•To start installation process, select Yes, to cancel select No.
•To select an option Yes or No, highlight the item by using _ / ‾ buttons and press the OK button.
The IDTV will automatically tune to the UHF transmision channels 21 to 68 looking for digital terrestrial TV broad- casts and displaying the names of channels found. This process will take about five minutes. To cancel
searching, you can press the 
button at any time during the process.
After Automatic Search process is completed, the following message asking for analogue channel search appears on the screen. TV switches to the analogue TV mode.
To seach for analogue channels, select Yes. The menu below is displayed to search for analogue chan- nels.
Downloaded From