Install Menu

PAP Source

Select PAP Source item by using α / β button. Use

_/ ‾ button to set PAP source.

Note: When main picture source is TV, AV-1, AV-2 or AV-3, PIP window can only be set to HDMI-1, HDMI-2, AV-5, PC source or vice versa.

PAP SWAP

Select PAP SWAP item by using α / β button. Use

_/ ‾ button. This function enables to swap between the main and the PAP picture.

Note: See Appendix B for all PIP/PAT modes.

Sleep Timer

By pressing α / β select “Sleep Timer”.Press _ /

‾button to set the Sleep Timer.

The timer can be programmed between Off and 120 minutes in steps of 10 minutes.

Child Lock

By pressing α / β select Child Lock.

Press _ / ‾ button to set the Child Lock on or off. When on is selected, the TV can only be controlled by the remote control handset. In this case the control panel buttons will not work (except for the STANDBY button). Hence, if one of these buttons is pressed, “Child Lock On” will be displayed on the screen when the menu screen is not visible.

Language

By pressing α / β button, select Language.Use _

/‾ button to select the language. Available language options are; English, French, German, Italian, Span- ish, Portuguese, Dutch, Greek, Swedish, Norwegian, Danish, Finnish, Turkish, Croatian, Slovenian, Polish, Czech, Hungarian, Russian, Bulgarian, Greek, Slo- vak.

AV-2 Out

By pressing α / β select AV-2 Out.Use _ / ‾ button, to set AV-2 Out to TV/DTT, AV-1, AV-3, FAV, YPbPr Audio or PC Audio.

Note: When TV Source is set to HDMI, HDMI Audio setting will be available among AV-2 Out options.

PC Audio In

By pressing α / β select Pc Audio In.By pressing

_/ ‾ button, you can change the PC Audio In to TV/ DTT, AV-1, AV-2, AV-3, FAV, YPbPr Audio, PC Au- dio.

Blue Background

You can set the TV to automatically change to a blue screen if the signal is weak or absent, or when there is no input from an external device.

The Blue Background feature can be turned on or off by pressing _ / ‾ button.

Menu Background

By pressing α / β button, select Menu Background. Transparency level is adjusted by pressing _ / ‾ button.

Menu Timeout

By pressing α / β button, select Menu Timeout. Press _ / ‾ button to change menu timeout to 15 sec, 30 sec or 60 sec.

Teletext Language

By pressing α / β button, select Teletext Language. Press _ / ‾ button to change Teletext Language to West, East, Turk/Gre,Cyrillic, or Arabic.

Default Zoom

Default zoom is a feature that provides the zoom mode of the TV set to be switched to the selected default zoom mode (Panoramic, 4:3 ,14:9 zoom) in case no WSS or 4:3 signal by end-user.

By pressing α / β button, select Default Zoom. You can set Default Zoom to Panoramic, 4:3 or 14:9 Zoom by pressing _ / ‾ button.

,167$//

Downloaded From TV-Manual.com Manuals - 24 -