Installation
The Installation menu mainly intends to help you for building a Channel Table in the most efficient way.
0DLQ0HQX
This menu includes the following items:
1.Add New Channels
2.First Time Installation.
ADD NEW CHANNELS:
This tuning menu consists of two parts: · Automatic Search
· Manual Search
Automatic Search
Automatic search is started by pressing the OK but- ton in the
All channels found are stored in a sorted form with respect to their channel numbers. Some services may not appear with the correct channel number. At the time of printing, not all broadcasters are sending their channel number information.
Manual Search
In manual search, the number of the multiplex is en- tered manually and only that multiplex is searched for the channels. For every valid channel number, signal level, signal quality and network name are shown at the bottom of the screen.
In both manual and auto search any existing channel in the database is not
FIRST TIME INSTALLATION
The user can use this item to load default settings, which had been loaded to the receiver at the factory.
To install factory settings, highlight “First Time In- stallation” menu and press the OK button, then you will be asked to confirm for deleting all channels and settings.
,QVWDOODWLRQ
$GG1HZ&KDQQHOV
)LUVW7LPH,QVWDOODWLRQ
By selecting YES and pressing the OK button, the existing channel table will be deleted.
After factory settings is loaded, “First Time Instal- lation” menu will be displayed.
Press the OK button to start installation. After search is completed for digital channels, a message asking search for analogue channels appears on the screen.
Press the OK button to search for analogue channels.The following menu appears on the screen for analogue channel search.
$XWR3URJUDP
Downloaded From