Note: Equalizer menu settings can be altered only when the Equalizer Mode is in User.
Balance
By pressing α / βselect Balance.Press _ / ‾ button to change the level of the balance.Balance level can be adjusted between
Headphone
By pressing α / β button, select Headphone. Press
‾button to enter hedphone menu. volume
By pressing α / β button, select Volume. Press ‾ button to increase hp volume level. Press _ button to decrease hp volume level. Headphone volume level can be adjusted between 0 and 63.
sound mode
By pressing α/ βbutton, select Sound Mode. Press
_/ ‾ button to change sound mode.
Sound mode is used to identify sound mode of the headphone and can be set to mono, stereo, dual I or dual II according to the transmission.
balance
By pressing α / β button, select Balance. Press ‾ button to increase balance to the right. Press _ button to decrease balance to the left. Balance level can be adjusted between
Press the MENU button to return to the previous menu.
Sound Mode
By pressing α / β select Sound Mode. Press _ / ‾ button, you can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel supports that mode.
AVL
By pressing α / β select AVL. Press _ / ‾ button to set the AVL as on or off.
Effect
By pressing α / β select Effect. Press _ / ‾ button to set Effect as on or off.
Dynamic Bass
Dynamic Bass is used to increase bass effect of the TV set.
By pressing α / β button, select Dynamic Bass. By pressing _ / ‾ button set Dynamic bass to Low, High or Off. It is not recommended to select High if listening at high volume levels. There is a subwoofer output that can accept an active subwoofer if you wish to create very high levels of Bass.
Subwoofer is active only if Dynamic Bass is set to Off.
Subwoofer
It is possible to connect an external, active subwoofer to the set to give a much deeper bass effect.
By pressing α / β button, select Subwoofer. Subwoofer can be set to On or Off.
Dynamic Bass is not available if Subwoofer is set to On.
Set Subwoofer to On when you connect an external subwoofer to the set.
3DS
By pressing α / β button, select 3DS. 3DS can be set to On or Off.
Set 3DS to On when you connect an external subwoofer to the set.
Store
•By pressing α / β button select Store.
•Press ‾ or OK button to store the adjustments. “Stored” will be displayed on the screen.
Downloaded From