GD-2000 Manual 6/18/98 5:25 PM Page 11
Power supply cable
Audio connecting cable | Interface cable |
Software Installation
To install DVD-ROM device driver in the host computer to operate this DVD-ROM drive, refer to the instruction manual of each DVD-ROM device driver.
Drive Operation
1)Turn on the SYSTEM, including the DVD-ROM drive.
2)Press the OPEN/CLOSE button of the DVD-ROM drive to open the disc tray.
3)Place the disc in the center of the disc tray, label side up as shown on the following page.
4)To close the disc tray, press the OPEN/CLOSE button on the DVD-ROM drive or push lightly on the center of the front of the disc tray as shown below. The disc tray will automatically close the rest of the way.
5)Operate referring to the instruction manual of DVD-ROM device driver.
GD-2000 DVD-ROM Manual - Page
